Click 'Download sample' for the free sample file:

Download sample file

Make/Model Information:

  • Brand:   Brother
  • Models included:
    • Brother HL-2400C

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English
  • Number of pages:   382
  • File size:  ∼ 7.92 MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMBR-1019

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

Download sample file

CHAPTER I PRODUCT OUTLINE
1. FEATURES
2. PARTS NAMES & FUNCTIONS
3. INTERNAL STRUCTURE
4. DESCRIPTION OF CONTROL PANEL
4.1 Video Controller Mode
4.2 Engine Controller Mode
CHAPTER II SPECIFICATIONS
1. RATING
2. GENERAL SPECIFICATIONS
2.1. Printing
2.2. Functions
2.3. Electrical and Mechanical
2.4. Paper Specification
3. ENVIRONMENTAL CONDITION
3.1 Ambient Temperature / Humidity / Altitude
CHAPTER III INSTALLATION
1. CONDITIONS REQUIRED FOR INSTALLATION
1.1. Environmental Conditions
1.2. Basic Layout of Printer Set-up Location
2. UNPACKING
2.1 Unpacking of Printer
2.2 Unpack the Starter Kit
3. INSTALLATION WORK
3.1 Install the OPC Belt Cartridge
3.2 Install the Toner Cartridge to the Printer
3.3 Install the Oil Bottle and Fuser Cleaner
3.4 Test Print
CHAPTER IV STRUCTURE OF SYSTEM COMPONENTS
1. BASIC STRUCTURE
1.1 Print System and Transfer System
1.2 Scanning System
1.3 Paper Transportation System
1.4 Fusing Unit
2. STRUCTURE OF THE CONTROL SYSTEM
2.1 Basic Structure
2.2 Control System
2.3 Main PCB (Video Controller PCB)
2.4 Power Supply Unit
2.5 High Voltage Power Supply Unit
2.6 Wiring Diagram
CHAPTER V CONTROL PANEL OPERATION
1. PANEL LAYOUT
2. VIDEO CONTROLLER MODE
2.1 Configuration of Operational Mode
2.2 Toner Save Mode / Power Save Mode
2.3 Line Test Mode
2.4 DRAM Test Mode
2.5 Program Version Display Mode
2.6 Test Print Mode
2.7 NVRAM Reset Mode
3. ENGINE CONTROLLER MODE
3.1 Configuration of Operational Mode
3.2 Operation of Normal Mode
3.3 Service Mode
3.4 Adjustment Work Procedures
CHAPTER VI PERIODIC MAINTENANCE
1. GENERAL
1.1 Handling Precautions
1.2 Periodic Maintenance Cleaning
1.3 Periodic Maintenance Parts and Maintenance Cycle
2. PERIODIC MAINTENANCE PROCEDURES
2.1 OPC Belt Cartridge Replacement
2.2 Fusing Unit Replacement
2.3 Transfer Roller Replacement
2.4 Paper Discharger Unit Replacement
2.5 Drum Cleaner Replacement
2.6 Ozone Filter Replacement
2.7 Paper Feed Roller and Separator Pad Replacement
2.8 Transfer Drum Replacement
CHAPTER VII DISASSEMBLY
1. BEFORE STARTING DISASSEMBLY
1.1 Precautions
1.2 Preparation of Disassembly
2. PARTS NAME
2.1 Cover
2.2 Circuit Boards (PCBs)
2.3 Motor Units
2.4 Clutches and Solenoids
2.5 Sensors
3. DISASSEMBLY FLOW
4. DISASSEMBLY PROCEDURE
4.1 Right Side of the Printer
4.2 Top of the Printer
4.3 Left Side of the Printer
4.4 Paper Exit Unit
4.5 Front of the Printer
4.6 Rear of the Printer
4.7 Fusing Unit
CHAPTER VIII TROUBLESHOOTING
1. OUTLINE OF TROUBLESHOOTING
2. OPERATOR CALL
2.1 Video Controller Mode
2.2 Engine Controller Mode
3. PAPER TRANSPORT ERROR
3.1 Feed Jam
3.2 Inner Jam
3.3 Outer Jam
3.4 Others
4. SERVICE CALL
4.1 Video Controller Mode
4.2 Engine Controller Mode
5. IMAGE FAILURE
APPENDIX A
CHAPTER VII DISASSEMBLY
1. BEFORE STARTING DISASSEMBLY
1.1 Precautions
1.2 Preparation of Disassembly
2. PARTS NAME
2.1 Cover
2.2 Circuit Boards (PCBs)
2.3 Motor Units
2.4 Clutches and Solenoids
2.5 Sensors
3. DISASSEMBLY FLOW
4. DISASSEMBLY PROCEDURE
4.1 Right Side of the Printer
4.1.1 Side Cover (R)
4.1.2 Base Cover (R)
4.1.3 Registration Clutch (RECL)
4.1.4 Fuser Clutch (FUCL)
4.1.5 Drum Cleaner Clutch (FBCL)
4.1.6 IOD2 PCB (with base)
4.1.7 Developer Drive Motor (DM)
4.1.8 Main Motor (MM)
4.1.9 Paper Feeding Clutch (PCLU)
4.1.10 Developer Clutch (K, Y, M, C)
4.1.11 Developer Drive Unit
4.1.12 Drum Cleaner Solenoid (FBSOL)
4.1.13 Main Gear Unit
4.1.14 Transfer Solenoid (TRSOL)
4.1.15 Ozone Fan (OZFAN)
4.1.16 Toner Sensor Assembly (TPD)
4.1.17 Waste Toner Sensor (WTS)
4.1.18 Waste Toner Feeder (L)
4.2 Top of the Printer
4.2.1 Upper Side Cover (LU)
4.2.2 Panel PCB (including LCD)
4.2.3 Side Cover (L)
4.2.4 Base Cover (L)
4.2.5 Upper Cover
4.2.6 IOD1 PCB
4.2.7 Control Fan (CTFAN)
4.2.8 Interlock Switch (Top) (Paper Exit Unit)
4.2.9 Drum Cleaner
4.2.10 Waste Toner Feeder Unit / Belt Sensor (PBS)
4.2.11 Transfer Drum
4.2.12 Erase Lamp
4.2.13 Drum Jam Sensor (DPJ)
4.2.14 Oil Sensor (OIL)
4.2.15 Interlock Switch (Front) (for Front Cover)
4.3 Left Side of the Printer
4.3.1 MCTL PCB
4.3.2 High Voltage Unit
4.3.3 Interlock Switch (Rear)
4.3.4 Drum Encoder Sensor (EN)
4.3.5 Fuser Connector
4.3.6 Rear Cover (R)
4.3.7 Power Supply Unit
4.3.8 Paper Size Sensor (PSU)
4.3.9 Toner Sensor (TTR)
4.4 Paper Exit Unit
4.4.1 Rear Cover (U)
4.4.2 Top Cover (Paper Exit Cover) / Fuser Fan (FUFAN)
4.4.3 Cleaning Roller Sensor (CRS)
4.4.4 Discharger Brush
4.4.5 Paper Exit Roller
4.4.6 Paper Exit Sensor (PT2)
4.5 Front of the Printer
4.5.1 Front Cover Unit
4.5.2 Scanner Unit (Scanner Motor inclusive)
4.6 Rear of the Printer
4.6.1 Rear Access Cover (L) / Transfer Unit
4.6.2 Transfer Roller
4.6.3 Register Roller
4.6.4 Paper Feed Roller / Separator Pad
4.6.5 Paper Empty Sensor (PE) / OHP Sensor (OHP)
4.6.6 Paper Feeding Sensor (PT1)
4.7 Fusing Unit
4.7.1 Fusing Heater Lamp
CHAPTER VIII TROUBLESHOOTING
1. OUTLINE OF TROUBLESHOOTING
2. OPERATOR CALL
2.1 Video Controller Mode
2.2 Engine Controller Mode
3. PAPER TRANSPORT ERROR
3.1 Feed Jam
3.2 Inner Jam
3.3 Outer Jam
3.4 Others
4. SERVICE CALL
4.1 Video Controller Mode
4.2 Engine Controller Mode
5. IMAGE FAILURE


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

5.00USD

Paypal
Credit card*
Debit card**

*Credit card only,  Paypal account not required.
**Debit card:  available only from selected countries/territories.