Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Canon
  • Models included:
    • Canon imageRUNNER 7105
    • Canon imageRUNNER 7095
    • Canon imageRUNNER 7086

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   854
  • File size:  ∼ 38.30  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMCN-1105

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

SERVICE
MANUAL
imageRUNNER
7105/7095/7086
DU7-1166-000
NOVEMBER 2005
REV. 0
SM main cover.qxp 11/28/2005 2:28 PM Page 1
Contents
Contents
Chapter 1 Introduction
1.1 System Construction
1.1.1 System Configuration with Input/Output Accessories
1.1.2 Combination of Delivery Accessories
1.1.3 System Configuration with Printing/Transmission Accessories
1.1.4 Functions of Printing/Transmission Accessories
1.2 Product Specifications
1.2.1 Names of Parts
1.2.1.1 External View
1.2.1.2 Cross Section
1.2.2 Using the Machine
1.2.2.1 Power Switch
1.2.2.2 Points to Note About Turning Off the Main Power Switch
1.2.2.3 Control Panel
1.2.3 User Mode Items
1.2.3.1 Common Settings
1.2.3.2 Timer Settings
1.2.3.3 Adjustment/Cleaning
1.2.3.4 Report Settings
1.2.3.5 System Settings
1.2.3.6 Copy Settings
1.2.3.7 Communications Settings
1.2.3.8 Mail Box Settings
1.2.3.9 Address Book Settings
1.2.3.10 Voice Guide Settings
1.2.4 Safety
1.2.4.1 Safety About Laser Light
1.2.4.2 CDRH Regulations
1.2.4.3 Handling of the Laser Assembly
1.2.4.4 Safety of Toner
1.2.5 Product Specifications
1.2.5.1 Product Specifications
1.2.6 Function List
1.2.6.1 Print Speed
1.2.6.2 Paper Type
1.2.7 RDS Specification
1.2.7.1 Embedded RDS (e-RDS)
Chapter 2 Installation
2.1 Making Pre-Checks
2.1.1 Points to Note Before Starting the Installation Work
2.1.2 Selecting the Site of Installation
Contents
3.2.1 Basic Sequence of Operations (power-on)
Chapter 4 Main Controller
4.1 Construction
4.1.1 Construction/Functions
4.2 Construction of the Electrical Circuitry
4.2.1 Main Controller PCB
4.3 Start-Up Sequence
4.3.1 Overview
4.3.2 Start-Up Sequence
4.3.3 Action to Take in Response to E602
4.4 Shut-Down Sequence
4.4.1 Flow of Operation
4.5 Image Processing
4.5.1 Overview of the Image Flow
4.5.2 Configuration of the Image Processing Modules
4.5.3 Reader Input Image Processing
4.5.4 Compression/Expansion/Editing Block
4.5.5 Printer Output Image Processing
4.6 Parts Replacement Procedure
4.6.1 Main Controller Box
4.6.2 Main Controller PCB
4.6.3 SDRAM
4.6.4 Boot ROM
4.6.5 HDD
4.6.6 Video PCB
4.6.7 Reader I/F PCB
4.6.8 Controller Fan
Chapter 5 Original Exposure System
5.1 Construction
5.1.1 Specifications, Controls, and Functions
5.1.2 Specifications, Controls, and Functions
5.1.3 Major Components
5.1.4 Major Components
5.1.5 Construction of the Control System
5.1.6 Construction of the Control System
5.2 Basic Sequence
5.2.1 Basic Sequence of Operations
5.2.2 Basic Sequence of Operations
5.2.3 Basic Sequence of Operation in Response to a Press on the Start Key
5.2.4 Basic Sequence of Operation in Response to a Press on the Start Key
5.3 Various Control
5.3.1 Controlling the Scanner Drive System
5.3.1.1 Overview
5.3.1.2 Controlling the Scanner Motor
5.3.1.3 Controlling the Scanner Motor
Contents
5.3.2 Enlargement/Reduction
5.3.2.1 Changing the Reproduction Ratio in Main Scanning Direction
5.3.2.2 Changing the Reproduction Ratio in Sub Scanning Direction
5.3.2.3 Changing the Reproduction Ratio in Sub Scanning Direction
5.3.3 Controlling the Scanning Lamp
5.3.3.1 Overview
5.3.3.2 Overview
5.3.3.3 Scanning Lamp
5.3.3.4 Controlling the Activation
5.3.4 Detecting the Size of Originals
5.3.4.1 Overview
5.3.4.2 Points of Measurement Used for Original Size Identification
5.3.4.3 Overview of Operation
5.3.4.4 Overview of Operation
5.3.5 Dirt Sensor Control
5.3.5.1 Dust Detection in Stream Reading Mode
5.3.5.2 Dust Detection in Stream Reading Mode
5.3.5.3 White Plate Dust Detection Control
5.3.6 Image Processing
5.3.6.1 Overview
5.3.6.2 Overview
5.3.6.3 CCD Drive
5.3.6.4 CCD Drive
5.3.6.5 CCD Output Gain Correction, Offset Correction
5.3.6.6 CCD Output A/D Conversion
5.3.6.7 Outline of Shading Correction
5.3.6.8 Shading Adjustment
5.3.6.9 Shading Correction
5.4 Parts Replacement Procedure
5.4.1 CCD Unit
5.4.2 Copyboard glass
5.4.3 Standard White Plate
5.4.4 Scanning Lamp
5.4.5 Reader Controller PCB
5.4.6 Interface PCB
5.4.7 Inverter PCB
5.4.8 Scanner Motor
5.4.9 ADF Open/Close Sensor
5.4.10 Original Size Sensor
5.4.11 Scanner Home Position Sensor
5.4.12 Cooling Fan
5.4.13 Scanner Drive Cable
Chapter 6 Laser Exposure
6.1 Construction
6.1.1 Outline of the Laser Exposure System
6.2 Basic Sequence
6.2.1 Basic Sequence of Operations (laser exposure system)
Contents
6.3 Various Controls
6.3.1 Controlling the Laser Activation Timing
6.3.1.1 Turning On and Off the Laser Unit
6.3.1.2 Flow of the BD Signal
6.3.2 Controlling the Intensity of Laser Light
6.3.2.1 APC Control
6.3.3 Controlling the Laser Scanner Motor
6.3.3.1 Outline
6.3.4 Controlling the Laser Shutter
6.3.4.1 Controlling the Laser Shutter
6.4 Parts Replacement Procedure
6.4.1 Laser Scanner Unit
Chapter 7 Image Formation
7.1 Construction
7.1.1 Outline
7.1.2 Major Components
7.1.3 Pre-Transfer Exposure LED
7.2 Image Formation Process
7.2.1 Overview
7.3 Basic Sequence
7.3.1 Basic Sequence
7.4 Potential Control
7.4.1 Outline
7.4.2 Basics Sequence of Operations
7.4.3 Determining the Optimum Grid Bias
7.4.4 Grid Bias Corrective Control
7.4.5 Determining the Optimum Laser Output
7.4.6 Laser Output Corrective Control
7.4.7 Determining the Optimum Developing Bias
7.4.8 Potential Control for Transparency Mode
7.4.9 Target Potential Correction in Each Mode
7.5 Charging Mechanism
7.5.1 Primary Charging Mechanism
7.5.1.1 Outline
7.5.1.2 Primary Charging Assembly Cleaning Mechanism
7.5.1.3 Others
7.5.2 Dust-Collecting Roller Bias
7.5.2.1 Outline
7.5.3 Pre-Transfer Charging Mechanism
7.5.3.1 Outline
7.5.3.2 Controlling the Output to Suit the Environment (fuzzy control)
7.5.3.3 Pre-Transfer Charging Assembly Cleaning Mechanism
7.5.3.4 Others
7.6 Drum Cleaner Unit
7.6.1 Outline
7.6.2 Detecting the Waste Toner (case full condition)
7.7 Developing Assembly
Contents
2.1.3 Installation Space
2.1.4 Checking the Contents
2.1.5 Order of Installing Accessories
2.2 Unpacking and Installation
2.2.1 Points to Note When Turning On/Off the Main Power
2.2.2 Unpacking
2.2.3 Mounting the Scanner System
2.2.4 Mounting the Fixing Assembly
2.2.5 Mounting the Charging Assembly
2.2.6 Mounting the Charging Assembly
2.2.7 Mounting the Developing Assembly
2.2.8 Mounting the Pickup Assembly
2.2.9 Mounting the Control Panel
2.2.10 Supplying Toner
2.2.11 Turning On the Main Power
2.2.12 Stirring the Toner
2.2.13 Index Sheet Attachment
2.2.14 Other attachment
2.2.15 Others
2.2.16 Attaching the Labels, Placing Paper, and Checking Images and Operation (user mode)
2.2.17 Adjusting the Horizontal Registration
2.2.18 Adjusting the Lead Edge Registration
2.2.19 Setting the Cassette
2.2.20 Correcting the Skew
2.2.21 Switching Over the Paper Size for the Front Deck (right, left)
2.2.22 Checking the Operation in a System Configuration
2.3 Checking the Connection to the Network
2.3.1 Checking the Network Connections
2.3.2 Using the PING Command
2.3.3 Making a Check Using a Remote Host Address
2.4 Troubleshooting the Network
2.4.1 Troubleshooting the Network
2.4.2 Making a Check Using a Loop Back Address
2.4.3 Making a Check Using a Local Host Address
2.5 Installing the Card Reader
2.5.1 Checking the Contents
2.5.2 Installing the Card Reader-D1
2.6 Installing the Voice Guidance Kit
2.6.1 Checking Items in the Package
2.6.2 Turning Off the Host Machine
2.6.3 Installation Procedure
Chapter 3 Basic Operation
3.1 Construction
3.1.1 Functional Construction
3.1.2 Wiring Diagram of the Major PCBs
3.1.3 Controlling the Main Motor (M1)
3.2 Basic Sequence
Contents
7.7.1 Outline
7.7.2 Controlling the Developing Assembly
7.7.3 Controlling the Toner Cartridge Drive Mechanism
7.7.4 Controlling the Developing Bias
7.7.5 Detecting the Toner Level and Controlling the Toner Supply Mechanism
7.8 Transfer Mechanism
7.8.1 Transfer Guide Bias
7.8.1.1 Overview
7.8.1.2 Controlling the Output to Suit the Environment
7.8.2 Transfer Charging Mechanism
7.8.2.1 Outline
7.8.2.2 Controlling the Output to Suit the Environment (fuzzy control)
7.8.2.3 Correcting the Output at the Trailing Edge of Paper
7.8.2.4 Transfer Charging Assembly Cleaning Mechanism
7.8.2.5 Others
7.9 Separation Mechanism
7.9.1 Separation Charging Mechanism
7.9.1.1 Outline
7.9.1.2 Correcting the Output to Suit the Environment and the Toner Deposit
7.9.1.3 Correcting the Output upon Detection of Leakage
7.9.1.4 Others
7.10 Parts Replacement Procedure
7.10.1 Process Unit
7.10.2 Pre-Exposure Lamp
7.10.3 Primary Charging Assembly
7.10.4 Pre-Transfer Charging Assembly
7.10.5 Photosensitive Drum
7.10.6 Drum Cleaner Unit
7.10.7 Photosensitive Drum Heater
7.10.8 Sub Hopper
7.10.9 Developing Assembly
7.10.10 Developing Cylinder
7.10.11 Developing Blade
7.10.12 Developing Cylinder Deceleration Clutch
7.10.13 Developing Cylinder Clutch
7.10.14 Transfer/Separation Charging Assembly
7.10.15 Pre-Transfer Exposure LED
7.10.16 Separation Claw/Separation Claw Drive Assembly
7.10.17 Potential Sensor
7.10.18 Dust-Collecting Roller
7.10.19 Charging Wire
Chapter 8 Pickup/Feeding System
8.1 Construction
8.1.1 Specifications and Construction
8.1.2 Arrangement of Rollers and Sensors
8.1.3 Control System
8.1.4 Controlling the Pickup Motor (M2)
Contents
8.1.5 Index Paper Attachment
8.2 Basic Sequence
8.2.1 Right Deck
8.2.2 Pickup from the cassette 4
8.3 Detecting Jams
8.3.1 Jam Detection Outline
8.3.1.1 Outline
8.3.2 Delay Jams
8.3.2.1 Cassette Pickup (Right deck, Left deck, cassette 3, 4)
8.3.2.2 Other Delay Jams
8.3.3 Stationary Jams
8.3.3.1 Common Stationary Jams
8.3.3.2 Stationary Jam at Power-On
8.4 Cassette Pick-Up Unit
8.4.1 Outline
8.4.2 Detecting the Presence/Absence of Paper
8.4.3 Detecting the Level of Paper
8.4.4 Cassette 3/4
8.4.5 Markings on the Width Guide Rail
8.4.6 Paper Size
8.5 Manual Feed Pickup Unit
8.5.1 Pickup Operation
8.5.2 Detecting the Paper Size
8.6 Deck
8.6.1 Outline
8.6.2 Lifter Limiter (deck right/left)
8.6.3 Detecting the Presence/Absence of Paper
8.6.4 Detecting the Level of Paper
8.6.5 Cassette Deck Right/Left
8.7 Registration Unit
8.7.1 Outline
8.7.2 Sequence of Operations (registration brake)
8.8 Duplex Feeding Unit
8.8.1 Copying on the First Side
8.8.2 Copying on the Second Side
8.8.3 Sequence of Operations
8.8.4 Controlling the reversal motor (M11)
8.8.5 Controlling the duplexing feeder motor (M12)
8.8.6 No-Stacking Operation
8.8.7 Detecting the Horizontal Registration Position
8.8.8 Controlling the Horizontal Registration Motor (M15)
8.9 Delivery
8.9.1 Reversal Delivery
8.10 Detecting the Double-Feed
8.10.1 Detecting Double Feeding
8.11 Parts Replacement Procedure
8.11.1 Cassette Pickup Assembly
8.11.2 Cassette Lifter Motor
8.11.3 Right Deck Pickup Assembly
Contents
8.11.4 Left Deck Pickup Assembly
8.11.5 Left Deck Pickup Sensor
8.11.6 Right Deck Pickup Sensor
8.11.7 Manual Tray Assembly
8.11.8 Manual Feed Pull-Out Roller Unit
8.11.9 Manual Pickup Roller
8.11.10 Manual Feed Roller
8.11.11 Manual Separation Roller
8.11.12 Manual Feed Tray paper sensor
8.11.13 Manual Feed Pickup Solenoid
8.11.14 Registration Roller
8.11.15 Registration Clutch
8.11.16 Registration Brake Clutch
8.11.17 Fixing/Feed Unit
8.11.18 Feeding Roller
8.11.19 Vertical Path Roller
8.11.20 Fixing Feeding Unit Releasing Lever Sensor
8.11.21 Feeding Belt
8.11.22 Duplexing Unit
8.11.23 Separation Roller
8.11.24 Double Feeding Detection Sensor ( Transmission )
8.11.25 Double Feeding Detection Sensor ( Reception )
Chapter 9 Fixing System
9.1 Construction
9.1.1 Outline
9.1.2 Major Components
9.1.3 Overview of the Fixing Drive System
9.1.4 Controlling the Fixing Roller Drive
9.1.5 Controlling the Cleaning Web Drive
9.1.6 Controlling the Thermistor Reciprocating Mechanism
9.1.7 Controlling the Upper Separation Claw Reciprocating Mechanism
9.1.8 Controlling the Fixing Inlet Sensor Drive
9.2 Basic Sequence
9.2.1 Basic Sequence of Operations
9.3 Various Control Mechanisms
9.3.1 Controlling the Fixing Roller Temperature
9.3.1.1 Controlling the Down Sequence
9.3.1.2 Transparency Mode
9.3.1.3 Heavy Paper Mode
9.3.1.4 Power Save Mode
9.4 Protective Functions
9.4.1 Error Detection
9.5 Parts Replacement Procedure
9.5.1 Fixing Unit
9.5.2 Upper Fixing Roller
9.5.3 Lower Fixing Roller
9.5.4 External Delivery Roller
Contents
9.5.5 Internal Delivery Roller
9.5.6 Main Thermistor
9.5.7 Sub Thermistor
9.5.8 Thermal Switch
9.5.9 Fixing Heater
9.5.10 Fixing Cleaning Belt
9.5.11 Claw Jam Sensor
9.5.12 External Delivery Sensor
9.5.13 Internal Delivery Sensor
9.5.14 Reversal Sensor
9.5.15 Fixing Inlet Sensor
9.5.16 Fixing/Feeding Outlet Sensor
9.5.17 Delivery Speed Switch Clutch
9.5.18 Upper Separation Claw
9.5.19 Lower Separation Claw
Chapter 10 External and Controls
10.1 Control Panel
10.1.1 Overview
10.2 Counters
10.2.1 Soft Counter
10.3 Fans
10.3.1 Fans
10.3.2 Fans
10.3.3 Sequence of Fan Operation
10.4 Power Supply System
10.4.1 Power Supply
10.4.1.1 Overview of the Power Supply System
10.4.2 Backup Battery
10.4.2.1 Back-Up Battery
10.4.3 Energy-Saving Function
10.4.3.1 Overview
10.5 Parts Replacement Procedure
10.5.1 Left Pickup Drive Assembly
10.5.2 Pickup Drive Assembly
10.5.3 Developing Drive Assembly
10.5.4 Vertical Path Drive Assembly
10.5.5 Waste Toner Drive Assembly
10.5.6 Multifeeder Pickup Drive Assembly
10.5.7 Lifter Drive Assembly
10.5.8 Main Drive Assembly
10.5.9 Drum Drive Assembly
10.5.10 Cassette Pickup Drive Assembly
10.5.11 Power Supply Unit
10.5.12 Control Panel
10.5.13 Control Panel LCD Unit
10.5.14 Cover Switch Assembly
10.5.15 Manual Feed Tray Switch Assembly
Contents
10.5.16 Drum Heater Switch Assembly
10.5.17 DC Controller PCB
10.5.18 Control Panel Inverter PCB
10.5.19 Control Panel Key Switch PCB
10.5.20 Control Panel Family PCB
10.5.21 Control Panel CPU PCB
10.5.22 AC Driver PCB
10.5.23 All Night Power Supply PCB
10.5.24 Relay PCB
10.5.25 High-Voltage Transformer (AC)
10.5.26 HV-AC PCB
10.5.27 HV-DC PCB
10.5.28 High-Voltage PCB
10.5.29 Motor Driver PCB
10.5.30 Transceiver PCB
10.5.31 Double Feeding Detection PCB ( Transmission )
10.5.32 Double Feeding Detection PCB ( Reception )
10.5.33 Fixing Heat Discharge Fan
10.5.34 Laser Cooling Fan
10.5.35 De-Curling Fan
10.5.36 Drum Fan
10.5.37 Pre-Transfer Charging Assembly Fan
10.5.38 Power Supply Cooling Fan 1
10.5.39 Power Supply Cooling Fan 2
10.5.40 Separation Fan
10.5.41 Developing Fan
10.5.42 Delivery Anti-Adhesion Fan
10.5.43 Duplex Feed Fan
10.5.44 Separation Heat Discharge Fan
10.5.45 Reader Heat Discharge Fan 2
10.5.46 Fixing Inlet Sensor Motor
Chapter 11 MEAP
11.1 MEAP
11.1.1 Overview
11.1.2 MEAP Counter
11.1.3 Construction of the MEAP Platform
Chapter 12 RDS
12.1 RDS
12.1.1 Application operation mode
12.1.2 Service Center URL and Port Specification
12.1.3 Communication test
12.1.4 Communication log
12.1.5 Detailed Communication log
12.1.6 SOAP communication function
12.1.7 Resend at SOAP transmission error
Contents
12.1.8 e-RDS setting screen
12.1.9 Sleep operation
12.1.10 Network Setting (Maintenance)
12.1.11 e-RDS Setting (Maintenance)
12.1.12 Trouble shoot
12.1.13 Error message
Chapter 13 Maintenance and Inspection
13.1 Periodically Replaced Parts
13.1.1 Overview
13.1.2 Machine Proper
13.2 Durables and Consumables
13.2.1 Overview
13.2.2 Machine Proper
13.3 Scheduled Servicing Basic Procedure
13.3.1 Scheduled Servicing Basic Procedure
13.3.2 Scheduled Servicing Chart
13.3.3 Scheduled Maintenance Work Procedure
13.3.4 Points to Note About Schedule Servicing
Chapter 14 Standards and Adjustments
14.1 Image Adjustment Basic Procedure
14.1.1 Making Pre-Checks
14.1.2 Making Checks on the Printer Side (Checking the Images)
14.1.3 Making Checks on the Printer Side (Checking the Density Slope)
14.1.4 Making Checks on the Printer Side (Checking the Solid Black Density)
14.1.5 Making Checks on the Printer Side (Checking for fogging)
14.1.6 Making Checks on the Printer Side (Checking Halftone Density)
14.1.7 Making Checks on the Reader Unit
14.1.8 Potential Control System Conversion Table
14.2 Image Adjustments
14.2.1 Standards of Image Position
14.2.2 Checking the Image Position
14.2.3 Adjusting Side Registration
14.2.4 Adjusting the Image Leading Edge Margin
14.2.5 Adjusting the Left/Right Non-Image Width
14.2.6 Adjusting the Leading Edge Non-Image Width
14.3 Scanning System
14.3.1 When Replacing Components of the Scanning System
14.3.2 When Replacing Components of the Scanning System
14.3.3 Adjusting the Position of the No. 1/No. 2 Mirror Base
14.4 Laser Exposure System
14.4.1 When Replacing the Laser Scanner Unit
14.4.2 Checking the Laser Power
14.5 Image Formation System
14.5.1 Adjusting the Height of the Charging Wire
14.6 Fixing System
Contents
14.6.1 Adjusting the Lower Roller Pressure (nip)
14.6.2 Points to Note When Mounting the Fixing Heater
14.7 Electrical Components
14.7.1 After Replacing the Hard Disk
14.7.2 After Replacing the Main Controller
14.7.3 After Replacing the DC Controller PCB
14.7.4 After Replacing the Reader Controller PCB
14.7.5 After Replacing the Reader Controller PCB
14.7.6 After Replacing the HV-DC PCB
14.7.7 When Replacing the Potential Sensor/Potential Control PCB
14.7.8 Checking the Surface Potential Control System
14.7.9 Checking the Environment Sensor
14.8 Pickup/Feeding System
14.8.1 Orientation of the Deck/Cassette Pickup Roller
14.8.2 Orientation of the Deck/Cassette Separation Roller
14.8.3 Orientation of the Feeding Roller of the Deck/Cassette Pickup Assembly
14.8.4 Orientation of the Pickup Roller of the Manual Feed Tray/Side Paper
14.8.5 Orientation of the Feeding Roller of the Manual Feed Tray
14.8.6 Orientation of the Feeding Roller of the Side Paper Deck
14.8.7 Adjusting the Pressure of the Deck/Cassette Separation Roller
14.8.8 Adjusting the Pressure of the Pickup/Feeding Roller of the Manual
14.8.9 Location of the solenoids
14.8.10 Position of the Fixing Web Solenoid (SL2)
14.8.11 Position of the Delivery Flapper Solenoid (SL3)
14.8.12 Position the Fixing/Feeder Unit Locking Solenoid (SL4)
14.8.13 Position of the Multifeeder Latch Solenoid (SL6)
14.8.14 Position of the Deck (right) Pickup Solenoid (SL7)
14.8.15 Position of the Deck (Left) Pickup Solenoid (SL8)
14.8.16 Position of the Cassette 3/4 Pickup Solenoid (SL9/10)
14.8.17 Position of the Side Paper Deck Pickup Roller Releasing Solenoid
14.8.18 Fitting the Side Guide Timing Belt of the Manual Feed Tray Assembly
14.8.19 Fitting the Drive Belt
Chapter 15 Correcting Faulty Images
15.1 Making lnitial Checks
15.1.1 Checking the Side of Installation
15.1.2 Checking the Originals
15.1.3 Checking the Copyboard Cover, Copyboard Glass, and Standard White Plate
15.1.4 Checking the Charging Assemblies
15.1.5 Cheiking the Develop Unit
15.1.6 Checking the Paper
15.1.7 Checking the Periodically Replaced Parts
15.1.8 Others
15.2 Outline of Electrical Components
15.2.1 Clutch/Solenoid
15.2.1.1 Clutches
15.2.1.2 Solenoids
15.2.2 Motor
Contents
15.2.2.1 Motors
15.2.3 Fan
15.2.3.1 Fans
15.2.3.2 Fans
15.2.4 Sensor
15.2.4.1 Sensor (reader)
15.2.4.2 Sensor (reader)
15.2.4.3 Sensor 1
15.2.4.4 Sensor 2
15.2.5 Switch
15.2.5.1 Switches
15.2.6 Lamps, Heaters, and Others
15.2.6.1 Heaters, Lamps, and Others
15.2.7 PCBs
15.2.7.1 PCBs
15.2.8 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB
15.2.8.1 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB
15.2.8.2 Main controller PCB
15.2.8.3 DC controller PCB
Chapter 16 Self Diagnosis
16.1 Error Code Table
16.1.1 Error Code Table
16.2 Error Code Details
16.2.1 Error Code Details
16.2.2 Detail in E602
16.3 Jam Code
16.3.1 Jam Code (printer)
16.3.2 Jam Code (DADF-Q1)
16.3.3 Jam Code (DADF-M1)
16.4 Alarm Code
16.4.1 Alarm Code
Chapter 17 Service Mode
17.1 Outline
17.1.1 Service mode screen configuration
17.1.2 Entering or selecting service modes
17.1.3 Exiting service modes
17.1.4 Backing Up Service Mode
17.1.5 Initial screen
17.1.6 Main/intermediate item screen
17.1.7 Sub-item screen
17.2 DISPLAY (Status Display Mode)
17.2.1 COPIER
17.2.1.1 COPIER Items
17.2.2 FEEDER
17.2.2.1 FEEDER Items
Contents
17.3 I/O (I/O Display Mode)
17.3.1 Overview
17.3.2
17.3.3
17.3.4
17.3.5
17.3.6
17.3.7
17.3.8
17.4 ADJUST (Adjustment Mode)
17.4.1 COPIER
17.4.1.1 COPIER Items
17.4.2 FEEDER
17.4.2.1 FEEDER Items
17.4.3 SORTER
17.4.3.1 SORTER Items
17.5 FUNCTION (Operation/Inspection Mode)
17.5.1 COPIER
17.5.1.1 COPIER Items
17.5.2 FEEDER
17.5.2.1 FEEDER Items
17.5.3 SORTER
17.5.3.1 SORTER Items
17.6 OPTION (Machine Settings Mode)
17.6.1 COPIER
17.6.1.1 COPIER Items
17.6.1.2 Soft Counter Specifications
17.6.2 FEEDER
17.6.2.1 FEEDER Items
17.6.3 SORTER
17.6.3.1 SORTER Items
17.6.4 BOARD
17.6.4.1 BOARD Items
17.7 TEST (Test Print Mode)
17.7.1 COPIER
17.7.1.1 COPIER Items
17.8 COUNTER (Counter Mode)
17.8.1 COPIER
17.8.1.1 COPIER Items
Chapter 18 Upgrading
18.1 Outline
18.1.1 Overview of Upgrading Work
18.1.2 Outline of the Functions and Operations
18.1.3 Points to Note at Time of Downloading
18.2 Making Preparations
18.2.1 Installing the System Software (System CD -> SST)
18.2.2 Copying the System Software (SST -> USB)
Contents
18.2.3 Making Connections (SST in use)
18.2.4 Making Connections (USB device in use)
18.3 Formatting the HDD
18.3.1 Formatting the HDD for All Partition
18.3.2 Formatting the HDD for Selected Partitions
18.3.3 Formatting the Partitions
18.4 Downloading System Software
18.4.1 Downloading the System Software (ALL)
18.4.1.1 Outline
18.4.1.2 Downloading Procedure
18.4.2 Downloading the System Software (Single)
18.4.2.1 Downloading Procedure
18.4.3 Uploading and Downloading Backup Data
18.4.3.1 Outline
18.4.3.2 Uploading Procedure
18.4.3.3 Downloading Procedure
18.4.4 Version Upgrade using USB
18.4.4.1 Overview of Menus and Functions
18.4.4.2 Points to Note
18.4.4.3 Downloading/Writing the System Software (auto)
18.4.4.4 Downloading the System Software (auto or selective)
18.4.4.5 Downloading the System Software (overwriting)
18.4.4.6 Formatting the HDD
18.4.4.7 Other Functions
Chapter 19 Service Tools
19.1 Service Tools
19.1.1 Special Tools Table
19.1.2 Solvents/Oils
Appendix
General Timing Chart
Signal Names
General Circuit Diagrams
CATALOG
imageRUNNER
7105/7095/7086
DU7-3150-000
DEC. 2005
SM COVER MAIN.qxp 12/8/2005 11:46 AM Page 1
Contents
NUMERICAL INDEX
iR7086/7095/7105
iR7086/7095/7105
A ASSEMBLY LOCATION DIAGRAM
100 EXTERNAL COVERS, PANELS, ETC.
101 MACHINE FRONT PLATE
102 INTERNAL COMPONENTS 1
103 INTERNAL COMPONENTS 2
104 INTERNAL COMPONENTS 3
105 INTERNAL COMPONENTS 3
106 MACHINE REAR PLATE 1
107 MACHINE REAR PLATE 2
108 MACHINE BOTTOM PLATE
110 POWER CORD TERMINAL ASSEMBLY
120 DOOR SWITCH MOUNT ASSEMBLY
130 CONTROL PANEL ASSEMBLY
160 EXTERNAL COVERS, PANELS, ETC.
161 FRAME ASSEMBLY
162 PAPER PICK-UP TRAY ASSEMBLY
163 UPPER COVER ASSEMBLY
164A PAPER PICK-UP ASSEMBLY
164B SEPARATION ASSEMBLY
164C PAPER DELIVERY ASSEMBLY
165 SEPARATION MOTOR ASSEMBLY
166 BELT MOTOR ASSEMBLY
167 MULTI TRAY ASSEMBLY
168 DELIVERY LOWER GUIDE ASSEMBLY
190 SEPARATION FIXING FAN ASS'Y
194 PRI. POLYGON LASER FAN ASS'Y
195 DRUM FAN STAY ASSEMBLY
210 READER ASSEMBLY
211 READER FRAME ASSEMBLY
230 VERTICAL PATH DRIVE ASSEMBLY
231 LIFTER DRIVE ASSEMBLY
250 MAIN DRIVE ASSEMBLY
251 DRUM DRIVE ASSEMBLY
260 PICK-UP MAIN DRIVE ASSEMBLY
261 PICK-UP DRIVE ASSEMBLY
Contents
263 LEFT PICK-UP DRIVE ASSEMBLY
264 MULTI FEED DRIVE ASSEMBLY
265 EXTRACTION ROLLER ASSEMBLY
270 DEV. DRIVE ASSEMBLY
280 CLEANER DRIVE ASSEMBLY
300 CASSETTE
302 RIGHT PAPER STOCK ASSEMBLY
303 LEFT PAPER STOCK ASSEMBLY
305 CASSETTE HEATER UNIT
311 CASSETTE PICK-UP ASSEMBLY
312 FRONT DECK RIGHT PICK-UP ASSEMBLY
313 FRONT DECK LEFT PICK-UP ASS'Y
315 MULTI FEEDER ASSEMBLY
316 MULTI TRAY ASSEMBLY
320 FIXING/FEEDER FRAME ASSEMBLY
325 REGIST. TRANSFER ASSEMBLY
330 FEEDER ASSEMBLY
350 INTERNAL DELIVERY UPPER ASS'Y
351 EXTERNAL DELIVERY UPPER ASS'Y
360 DUPLEX ASSEMBLY
420 1 MIRROR MOUNT ASSEMBLY
430 2 MIRROR MOUNT ASSEMBLY
460 SCANNER ASSEMBLY
510 PHOTO-SENSITIVE DRUM ASSEMBLY
550 PRIMARY CORONA ASSEMBLY
570 PRE-TRANSFER CORONA ASSEMBLY
580 TRANSFER/SEPARATE CORONA ASS'Y
600 AP KIT ASSEMBLY
620 HOPPER ASSEMBLY
640 DEVELOPING ASSEMBLY
645 BUFFER ASSEMBLY
720 PAPER FEED CLAW ASS'Y
770 WASTE TONER ASSEMBLY
775 WASTE TONER PIPE ASSEMBLY
810 FIXING ASSEMBLY
900 CONTROLLER BOX ASSEMBLY
910 MAIN BODY POWER SUPPLY ASS'Y
930 DC CONTROLLER PCB ASSEMBLY
935 READER CONTROLLER PCB ASSEMBLY
940 POTENTIAL MEASURING PCB ASS'Y
941 INTERFACE, PCB ASSEMBLY
945 INVERTER PCB ASSEMBLY
960 AC DRIVER PCB ASSEMBLY
961 REVERSE MOTOR DRIVER PCB ASS'Y
980 H.V. AC TRANSFORMER PCB ASS'Y
985 H. V. T. PCB ASSEMBLY
986 FIXING SENSOR DRIVE ASSEMBLY
MIRROR ASSEMBLY 1
FRONT DECK (RIGHT)
PICK-UP ASS'Y
MIRROR ASSEMBLY 2
CASSETTE PICK-UP
ASSEMBLY
FRONT DECK (LEFT) PICK-UP ASS'Y
SCANNER ASSEMBLY
CONTROL PANEL ASSEMBLY
PRIMARY POLYGON LASER FAN ASSEMBLY
READER ASSEMBLY
1.5K RIGHT PAPER STOCK ASSEMBLY
CASSETTE
1.5K LEFT PAPER STOCK ASSEMBLY
DOOR SWITCH MOUNT ASSEMBLY
READER FRAME ASSEMBLY
FIGURE A
ASSEMBLY LOCATION DIAGRAM


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

8.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.