Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Konica-minolta
  • Models included:
    • KonicaMinolta 7075
    • KonicaMinolta 7085
    • KonicaMinolta Force75
    • KonicaMinolta Force85

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   1196
  • File size:  ∼ 40.60  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMKM-1041

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

FEBRUARY 2003
CSM-7075/F75/7085/F85
SERVICE MANUAL
MODELS
7075/FORCE 75
7085/FORCE 85
CONTENTS
CONTENTS
1.OUTLINE
OUTLINE OF SYSTEM
7075/7085 PRODUCT SPECIFICATIONS
CENTER CROSS-SECTIONAL VIEW
DRIVE SYSTEM DIAGRA M
[1] Main Drive Section
[2] Drum Drive Section
[3] Developing Drive Section
[4] Paper Feed Drive Section
[5] Tray 1 and 2 Paper Feed Drive Section
[6] Tray 3 Paper Feed Drive Section
[7] Vertical Conveyance Drive Section
[8] By-pass Paper Feed Drive Section
[9] Conveyance/Transfer and Separation
Wire Cleaning Drive Section
[10] ADU Conveyance Drive Section
[11] Paper Exit Drive Section
[12] Toner Supply Drive
[13] Optics Drive Section
[14] Web Drive Section
2. UNIT EXPLANATION
EXTERNAL SECTION
[1] Composition
DRIVE SECTION
[1] Composition
[2] Mechanisms
[3] M1 (Main) Control
[4] M2 (Drum) Control
READ SECTION
[1] Composition
[2] Mechanisms
[3] M13 (Scanner Drive) Control
[4] Exposure control
[5] Original Read Control
[6] APS Control
[7] AE Control
WRITE UNIT
[1] Composition
[2] Mechanisms
[3] M17 (Polygon ) Control
[4] Image Write Control
DRUM UNIT
[1] Composition
[2] Mechanisms
[3] Separation Claw Control
[4] Paper Guide Plate Control
[5] Drum Potential Control
[6] HTR1 (drum heater) Control (7075 only) 2-E-4
CORONA UNIT SECTION
[1] Composition
[2] Mechanisms
[3] Charging Control
[4] Transfer/Separation Control
SAFETY AND IMPORTANT WARNING ITEMS
IMPORTANT NOTICE
DESCRIPTION ITEMS FOR DANGER, WARNING
AND CAUTION
SAFETY WARNINGS
SAFETY INFORMATION
IMPORTANT INFORMATION
SAFETY CIRCUITS
INDICATION OF WARNING ON THE MACHINE
SYSTEM CONFIGURATORS
FORCE 75
FORCE 85
LIST OF DIFFERENCES
7075/FORCE 75
7075/7085
7085/FORCE 85
FORCE 75 OUTLINE OF SYSTEM
FORCE 85 OUTLINE OF SYSTEM
FORCE 75 PRODUCT SPECIFICATIONS
FORCE 85 PRODUCT SPECIFICATIONS
Please Note
Due to their similarities, information
pertaining to the Models 7075, FORCE 75,
7085, and FORCE 85 have been combined
under one cover. A listing of the major
differences between these models is
provided in the front section of this service
manual.
Differences between the 7075 and 7085 are
also identified throughout the contents of
this service manual; information not
identified as model-specific applies to both
models.
Although not identified as such, information
pertaining to the 7075 throughout this manual
also applies to the FORCE 75, as does
7085 information applying to the FORCE
85, except as noted in the differences list
located in the front section of this service
manual.
CONTENTS
[5] M23 (Charger Cleaning ) Control
[6] M18 (Transfer/Separation Cleaning)
Control
[7] PCL/TSL Control
DEVELOPING UNIT
[1] Composition
[2] Mechanisms
[3] M3 (Developing Unit Drive) Control
[4] Developing Bias Control
[5] Toner Density Control
[6] Dmax Control
[7] Gradation Correction Control
[8] Dot Diameter Correction Control
[9] FM2 (Developing Suction) Control
TONER SUPPLY UNIT
[1] Composition
[2] Mechanisms
[3] Toner Level Detection Control
[4] M11 (Toner Supply 1) Control
CLEANING/TONER RECYCLE UNIT
[1] Composition
[2] Mechanisms
[3] M14 (Blade) Control
TRAY 1/2 PAPER FEED UNIT
[1] Composition
[2] Mechanisms
[3] First Paper Feed Control
[4] Paper Up Drive Control
[5] Paper Size Detection Control
[6] No Paper Detection Control
TRAY 3 PAPER FEED UNIT
[1] Composition
[2] Mechanisms
[3] First Paper Feed Control
[4] Paper Up Drive Control
[5] Paper Size Detection Control
[6] No Paper Detection Control
BY-PASS TRAY
[1] Composition
[2] Mechanisms
[3] First Paper Feed Control
[4] Paper Up/down Control
[5] Paper Size Detection Control
[6] No Paper Detection Control
VERTICAL PAPER CONVEYANCE SECTION .. 2-M-1
[1] Composition
[2] Mechanisms
[3] Vertical Paper Conveyance Control
[1] Composition
[2] Mechanisms
[3] Loop/Second Paper Feed Control
[4] Paper Conveyance Control
[5] Paper Reverse and Exit Control
[6] ADU Paper Feed/Reversal Control
[7] ADU Paper Conveyance/Feed Control .2-N-15
FIXING UNIT
[1] Composition
[2] Mechanisms
[3] M16 (Web Drive)
[4] Fixing Temperature Control
[5] SD3 (fixing guide) Control
OTHER KINDS OF CONTROL
[1] Parts Energized when
the Main Switch is OFF
[2] Parts that Operate when the Main Switch
is Turned ON
[3] Cooling Fan Control
[4] Operation Panel Control
[5] Counter Control
[6] Option Control
3. DISASSEMBLY/ASSEMBLY
EXTERNAL SECTION
[1] Replacing Ozone Filters
[2] Removing and Reinstalling the External
[3] Removing and Reinstalling the Front
Right Door
[4] Removing and Reinstalling the Front
Left Door
[5] Removing and Reinstalling the Operation
DRIVE SECTION
[1] Removing and Reinstalling the Drum
[2] Removing and Reinstalling the Main
READ SECTION
[1] Screw that Must not be Removed/
Loosened
[2] Removing and Reinstalling the CCD
[3] Replacing the Exposure Lamp
[4] Replacing and Reinstalling the Exposure
[5] Installing the Optics Wire
[6] Cleaning the Slit Glass and White Color
Reference Plate Glass
[7] Cleaning the Platen Glass
WRITE SECTION
[1] Removing and Reinstalling the Write
[2] Cleaning the Dust-proof Glass
[3] Removing and Reinstalling the Image
Control Board
DRUM UNIT
[1] Removing and Reinstalling the Drum
[2] Cleaning and Installing the Coupling
[3] Removing and Reinstalling the Drum
Temperature Sensor Board
CONTENTS
[4] Cleaning the Toner Control Sensor
[5] Removing, Cleaning and Reinstalling
the Drum
[6] Removing and Reinstalling the Separation
CORONA UNIT SECTION
[1] Screws that Must not be Removed/
Loosened
[2] Removing and Reinstalling the Charging
Corona Unit
[3] Removing and Reinstalling the Charge
Control Plate
[4] Replacing the Charging Wires
[5] Removing and Reinstalling the Charging
Wire Cleaning Pad
[6] Removing and Reinstalling the PCL
[7] Cleaning the Charging Corona Unit/
[8] Removing and Reinstalling the Transfer/
Separation Corona Unit
[9] Removing and Reinstalling the Plunger
Prevention Plate
[10] Replacing the Transfer/Separation Wires,
Transfer/Separation Wire Cleaning Block
and Support Rubbers
[11] Removing and Reinstalling the TSL
DEVELOPING UNIT
[1] Screws that must not be Removed/
Loosened
[2] Removing and Reinstalling the
Developing Unit
[3] Replacing the Developer
[4] Removing and Reinstalling the
Developing Suction Filter
TONER SUPPLY UNIT
[1] Replacing and Cleaning the Toner
Cartridge
[2] Drawing out the Toner Supply Unit
[3] Removing and Reinstalling the Toner
Supply Sleeves 1 and 2
[4] Removing and Reinstalling the Toner
Supply Unit
CLEANING/TONER RECYCLE UNIT
[1] Removing and Reinstalling the Cleaning/
Toner Recycle Unit
[2] Cleaning the Cleaning/Toner Recycle
[3] Removing and Reinstalling the Cleaning
[4] Removing and Reinstalling the Toner Guide
Brush and Plunger Prevention Felt
[5] Replacing Guide Plate Assembly
PAPER FEED UNITS OF TRAYS 1 AND 2
[1] Removing and Reinstalling Paper Feed
Trays 1 and 2
[2] Removing and Reinstalling the Front
Covers of Trays 1 and 2
[3] Cleaning the Paper Dust Removing
[4] Cleaning the Paper Pre-registration PS/
Paper Feed PS
[5] Removing and Reinstalling the Paper
Feed Roller and the Feed Roller
[6] Removing and Reinstalling the Double
Feed Prevention Roller
[7] Replacing the Pre-registration and the
Feed Clutches (MCs)
[8] Removing and Reinstalling the Up/Down
[9] Replacing the Up/Down Plate Wires
TRAY 3 PAPER FEED UNIT
[1] Removing and Reinstalling the Paper
Feed Tray 3
[2] Removing and Reinstalling the Front
Cover of Paper Tray 3
[3] Cleaning the Paper Dust Removing
[4] Cleaning the Paper Pre-registration PS/
the Paper Feed PS
[5] Removing and Reinstalling the Paper
Feed Roller and the Feed Roller
[6] Removing and Reinstalling the Double
Feed Prevention Roller
[7] Replacing the Pre-registration MC3
(MC8) and the Feed MC3 (MC7)
[8] Removing and Reinstalling the Up/Down
[9] Replacing the Up/Down Plate Wires
BY-PASS TRAY
[1] Removing and Reinstalling the By-pass
[2] Cleaning the Paper Size Detection
Sensors
[3] Replacing the Paper Feed Roller/the
Feed Roller Rubbers
[4] Replacing the Double Feed Prevention
Roller Rubber
VERTICAL CONVEYANCE SECTION
[1] Removing and Reinstalling the Vertical
Conveyance Section
[2] Removing and Reinstalling the Vertical
Conveyance MC (MC9, MC10)
[3] Replacing the Vertical Conveyance
Roller (Upper)
[4] Removing and Reinstalling the Vertical
Conveyance Rollers (Middle/Lower)
[5] Cleaning the Vertical Conveyance PS/
Loop PS
CONTENTS
ADU UNIT
[1] Drawing out and Reinstalling the ADU
[2] Cleaning the Paper Dust Removing
Brush for Registration Roller
[3] Cleaning the Paper Dust Removing
Brushes for the Registration Roller
[4] Cleaning PS44 (Registration PS)
[5] Cleaning Paper Mis-centering PS (PS1)/
Leading Edge Detection PS (PS45)
[6] Cleaning Paper Reverse PS (PS57)/ADU
Deceleration PS (PS59)
[7] Removing and Reinstalling the ADU
[8] Removing and Reinstalling Registration
MC (MC1)
[9] Removing and Reinstalling ADU Pre-
registration MC (MC2)
[10] Removing and Reinstalling the Second
Paper Feed Unit
[11] Removing and Reinstalling the ADU
[12] Removing and Reinstalling the
Registration Roller
[13] Removing and Reinstalling the
Registration Motor (M12) Assembly
[14] Removing and Reinstalling the Loop
Roller, ADU Paper Exit Roller, and
Pre-registration Roller
[15] Removing and Reinstalling the Pre-transfer
Roller and Pre-registration Loop
Roller
[16] Removing and Reinstalling the ADU
Reverse Roller
[17] Removing and Reinstalling the ADU Stand
Drive Board Assembly
[18] Removing and Reinstalling the ADU
Horizontal Conveyance Rollers
1 and 2
[19] Removing and Reinstalling the Paper
Reverse/Exit Rollers 1, 2, and 3
[20] Removing and Reinstalling the Paper
Reverse/Exit Unit Entrance Roller
[21] Removing and Reinstalling the Paper
Reverse/Exit Switchover Gate
[22] Removing and Reinstalling the Paper
Exit Roller
FIXING UNIT
[1] Removing and Reinstalling the Fixing
[2] Removing and Reinstalling the Fixing
Unit Top Cover
[3] Replacing the Cleaning Web
[4] Replacing the Fixing Heater Lamps
(Upper/Roller) (L2, L3)
[5] Removing and Reinstalling the Fixing
Upper Roller
[6] Removing and Reinstalling the Fixing
Lower Roller
[7] Removing and Reinstalling the Fixing
Heat Roller Assembly
[8] Replacing the Heater Lamp (Lower)
[9] Removing and Reinstalling the Fixing
Heat Roller
[10] Removing and Reinstalling the Cleaning
Roller (7075 only)
[11] Removing and Reinstalling the Fixing
Separation Claws (Lower)
[12] Removing and Reinstalling the Fixing
Separation Claws (Upper)
[13] Removing and Reinstalling the Actuator
for Fixing Exit PS (PS2)
[14] Removing and Reinstalling Fixing
Temper-ature Sensors 1 and 2
[15] Removing and Reinstalling Fixing
Temper-ature Sensors 3 and 4
[16] Removing and Reinstalling the
Thermostat (Upper)
[17] Removing and Reinstalling the Thermostat
(Lower)
SERVICE SECTION
(Contains separate table of contents)
2 - A - 1
EXTERNAL SECTION
[1] Composition
EXTERNAL SECTION
Right side cover
(lower)
Main switch Operation panel
Front right door
Tray 1
Tray 2
Left front door
Left side cover
Tray 3
Right side cover
(upper)
Bypass tray Cooling
Optional cover
Right side cover
(middle)
Rear cover
Vertical
conveyance
MODELS
7075/FORCE 75
7085/FORCE 85
SERVICE
SECTION
FEBRUARY 2003
CONTENTS
1. ADJUSTMENT
HOW TO USE THIS SECTION
[1] Scope and Precautions
ADJUSTMENTS MADE WHEN REPLACING
LIST OF ADJUSTMENT ITEMS
LCD ADJUSTMENT
[1] Control Panel Adjustment
[2] Panel Contrast/Key Sound Adjustment
SETTINGS AND ADJUSTMENTS MADE WITH
THE P FUNCTION
[1] Checking and Printing the P Function
[2] Setting up the P Function
MODE CHANGING MENU
[1] Mode Selection
25 MODE
[1] Selecting and Canceling the 25 Mode
[2] Setting Software DIP Switches
[3] Setting the Paper Size
[4] PM Count Resetting
[5] Setting the PM Cycle
[6] Collecting Data
[7] Copy Count by Parts to be Replaced
(Fixed Parts)
[8] Copy Count by Parts to be Replaced
(Optional Parts)
[9] Setting Passwords
[10] Setting the Telephone Number and/or Fax
Number of the Service Center
[11] Setting the Serial Number
[12] Displaying the ROM Version
[13] Setting KRDS
[14] KRDS Set Up
[15] Calling Time Setting Menu Mode
(Arbitrary)
[16] KRDS Host Calling
[17] Reference
[18] Data to be Processed
[19] Caution
[20] Error Code Table
[21] List of Adjustment Items in the 25 Mode
36 MODE
[1] Setting Method
[2] High Voltage Adjustment
[3] Drum Peculiarity Adjustment
[4] Drum Characteristic Adjustment
(manual)
[5] User Paper Setting
[6] Recall Standard Data (Process
Adjustment)
[7] Tray Adjustment
[8] Magnification Adjustment
[9] Timing Adjustment
[10] RADF Adjustment
[11] Centering Adjustment
[12] Distortion Adjustment (Copier)
[13] Non-image area erase check (7085 only)
[14] Recall standard data (Image adjustment)
[15] Running Test Mode
[16] Test pattern output mode
[17] Test pattern density setting
[18] Finisher adjustment
[19] List Output Mode
[20] Tandem mode initial setting (7075 only)
47 MODE
[1] 47 Mode/Multi Mode Setting Method
[2] Adjustment Data Display
[3] Hard Disk Check
[4] Input checklist
[5] Output checklist
OTHER ADJUSTMENTS
[1] Centering Adjustment
[2] Paper Feed Roller Load Adjustment
(7085 main body tray only)
[3] Paper up/down plate horizontal
adjustment
[4] Skew Adjustment
[5] Tray Spring Pressure Adjustment
[6] Paper Feed Height (Upper Limit)
Adjustment
[7] Pick-up Release Amount Adjustment
[8] RADF Mounting Position Adjustment
[9] RADF Skew Adjustment
[10] RADF Paper Skew Adjustment
[11] RADF Hinge Spring Pressure
Adjustment
[12] FNS Adjusting the Magnets on Conveyance
Guide Plate B
[13] FNS Adjusting the Magnets on Conveyance
Guide Plate C
[14] FNS Adjusting the Sub-tray Paper Exit
[15] FNS Adjusting the Paper-Path Switching
[16] FNS Adjusting the By-pass Gate
[17] FNS Adjusting the Shift Position
[18] FNS Adjusting Opening/Closing at the
Paper Exit
[19] FNS Adjusting the Paper Exit-Opening
Solenoid
[20] FNS Adjusting the Paper Exit-Opening
Lower Guide Plate
[21] FNS Adjusting the Mount Location of the
Paper Exit Arm
[22] FNS Adjusting the Mount Location of the
Upper Alignment Plates
[23] FNS Adjusting the Tension of the Upper
Alignment Plate Drive Timing Belt
[24] FNS Adjusting the Mount Location of the
Lower Alignment Plates (FS-108BM/
211 only)
CONTENTS
CONTENTS
[25] FNS Adjusting the Tension of the Lower
Alignment Plate Drive Timing Belt
(FS-108BM/211 only)
[26] FNS Adjusting the Stapling Position
(Flat Stapling)
[27] FNS Adjusting the Stapler Vertical
Positioning (FS-108/108BM/211 only)
[28] FNS Adjusting the Angle of the Stapling
Stopper (FS-108BM/211 only)
[29] FNS Adjusting the Angle of the Folding
Stopper (FS-108BM/211 only)
[30] FNS Adjusting the Tension of the Stapler-
Movement Timing Belt (FS-108/108BM/
211 only)
[31] FNS Adjusting the Tension of the Stapler-
Rotation Timing Belt
(FS-108/108BM/211 only)
[32] FNS Adjusting the Folding Force
(FS-108BM/211 only)
[33] FNS Adjusting the Mount Location of the
Folding Knife Motor (FS-108BM/
211 only)
[34] TU Trimming Parallelism Adjustment
[35] Adjusting the PZ Paper Path Switching
Solenoid
[36] Adjusting the Tension of the PZ Punch
shift Timing Belt
[37] Adjusting the PZ 1st Folding Skew
[38] Adjusting the Position of the PZ 2nd
Folding Stopper
[39] Adjusting the PZ 2nd Folding Skew 2nd
Stopper Assembly
2. ISW
WHAT IS ISW ?
[1] ISW-compatible boards
[2] Data flow
[3] Ready up the copier to start an ISW
transfer
[4] HELP + CHECK mode operation flow
[5] Operating procedure
[6] Preparing the copier to transfer
[7] Relationships between processing states
and operational LEDs
[8] Rewriting procedure after an error
interruption
........................................................................ 2-11
[9] Making the ISW connector and the power
connector available
[10] Kinds and quantities of update ROMs
3. SERVICE
SERVICE SCHEDULE
[1] Service Schedule
[2] Maintenance Items
[3] Main Unit Periodic Inspection Items
[4] RADF [DF-313], [DF-317]
[5] FNS [FS-108], [FS-111]
[6] FNS [FS-108BM], [FS-211]
[7] LCT [LT-401/411], [LT-402/412]
[8] PI [PI-108]
[9] TU [TU-108]
[10] PU [PU-108]
[11] PZ [PZ-108]
[12] Replacement parts list
[13] Important maintenance parts
COPY MATERIALS
[1] Consumables (Single unit supply)
[2] PM parts kit
[3] Maintenance kit
SERVICE MATERIAL LIST
CE TOOL LIST
4. ELECTRIC PARTSLIST
7075/7085 ELECTRICAL PARTS LAYOUT
DRAWING
[1] Read Section/Operational Section
[2] Charging Corona Wire Unit
[3] Drum Unit
[4] Cleaning Unit
[5] Tray 1,2,3
[6] Vertical Conveyance Section
[7] By-pass Feed Section
[8] Second Paper Feed Section
[9] ADU Unit
[10] Fixing Unit
[11] Paper Exit Section
[12] Toner Supply Unit
[13] Write Section
[14] Control/Drive Unit in Rear Section
DF-313/317 ELECTRICAL PARTS LAYOUT
DRAWING
LT-401/411 ELECTRICAL PARTS LAYOUT
DRAWING
TU-108 ELECTRICAL PARTS LAYOUT
DRAWING
PU-108 ELECTRICAL PARTS LAYOUT
DRAWING
PZ-108 ELECTRICAL PARTS LAYOUT
DRAWING
FS-111/211 ELECTRICAL PARTS LAYOUT
DRAWING
PI-108 ELECTRICAL PARTS LAYOUT
DRAWING
7075/7085 CONNECTOR LAYOUT DRAWING
[1] Read Section
[2] Charge Corotron Wire Unit
[3] Drum Unit
[4] Cleaning Unit
[5] Tray 1,2,3
[6] Vertical Conveyance Section
[7] By-pass Feed Section
[8] Second Paper Feed Section
[9] ADU Unit
CONTENTS
[10] Fixing Unit
[11] Paper Exit Section
[12] Toner Supply Unit
[13] Write Section
[14] Printer Control Board
[15] Power Supply Management Board
[16] Image Control Board
[17] ICB I/F Board
[18] ADU Stand Drive Board
[19] DC Drive Board (7075 only)
[20] AC Drive Board
[21] DC Power Supply Unit 1
[22] DC Power Supply Unit 2
[23] DC Power Supply Unit 3 (7085 only)
[24] Scanner Drive Board
[25] High Voltage Unit 1
[26] High Voltage Unit 2
[27] Jam Indicator Board
[28] L1 Inverter
[29] Drum Potential Sensor Board
[30] Drum Temperature Sensor Board
(7075 only)
[31] Operation Board 1
[32] Operation Board 2
[33] Optional I/F Board
[34] OB Inverter
[35] Toner Control Sensor Board
[36] KRDS
[37] Index Sensor Board
[38] A/D Converter Board
[39] Laser Driver Board 1/2
[40] Polygon Motor Drive Board
[41] Memory Board
[42] LAN I/F Board
[43] Printer Relay Board
DF-313/317 CONNECTOR LAYOUT
DRAWING
LT-401/411 CONNECTOR LAYOUT DRAWING
TU-108 CONNECTOR LAYOUT DRAWING
PU-108 CONNECTOR LAYOUT DRAWING
PZ-108 CONNECTOR LAYOUT DRAWING
FS-111/211 CONNECTOR LAYOUT
DRAWING
[1] FNS Control Board
[2] Relay Board (FNS-211 only)
PI-108 CONNECTOR LAYOUT DRAWING
[1] Drive Board
[2] Operation Board
7075 OVERALL WIRING DIAGRAM (1/5)
7075 OVERALL WIRING DIAGRAM (2/5)
7075 OVERALL WIRING DIAGRAM (3/5)
7075 OVERALL WIRING DIAGRAM (4/5)
7075 OVERALL WIRING DIAGRAM (5/5)
DF-313/317 OVERALL WIRING DIAGRAM
LT-401/411 OVERALL WIRING DIAGRAM
TU-108 OVERALL WIRING DIAGRAM
PU-108 OVERALL WIRING DIAGRAM
PZ-108 OVERALL WIRING DIAGRAM
FS-111 OVERALL WIRING DIAGRAM
FS-211 OVERALL WIRING DIAGRAM
PI-108 OVERALL WIRING DIAGRAM
5. JAM/ERROR CODE LIST
JAM CODE LIST
ERROR CODE LIST
6. TIMING CHARTS
7075 TIMING CHART (A4, LIFE SIZE,
DOUBLE-SIDED COPY, 2 SETS, TRAY1)
DF-313 TIMING CHART (A4, SINGLE-SIDED
ORIGINALS, 3 SHEETS)
DF-313 TIMING CHART (A4, DOUBLE-SIDED
ORIGINALS, 3 SHEETS)
LT-401 TIMING CHART (A4, 2 SHEETS)
LT-411 TIMING CHART (A3, 2 SHEETS)
TU-108 TIMING CHART (TRIM MODE, A3,
16 SHEETS, 2 SETS)
TU-108 TIMING CHART (THROUGH MODE, A3,
16 SHEETS, 2 SETS)
PU-108 TIMING CHART (PUNCH MODE, A4,
SINGLE-SIDED COPY, 3 SHEETS)
PU-108 TIMING CHART (PUNCH MODE, A3,
SINGLE-SIDED COPY, 3 SHEETS)
PZ-108 TIMING CHART (Z-FOLDING + PUNCH
MODE, A3, SINGLE-SIDED COPY, 3 SHEETS).. 6-10
7085 TIMING CHART (A4, LIFE SIZE, DOUBLE-
SIDED COPY, 2 SETS, TRAY 1)
DF-317 TIMING CHART (A4, SINGLE-SIDED
ORIGINALS, 3 SHEETS)
DF-317 TIMING CHART (A4, DOUBLE-SIDED
ORIGINALS, 3 SHEETS)
FS-111/211 TIMING CHART (SORT MODE, A4,
2 SHEETS ORIGINALS, 3 SETS 1:1)
FS-111/211 TIMING CHART (STAPLE MODE,
A4, 2 SHEETS ORIGINALS, 3 SETS 1:1)
FS-111/211 TIMING CHART (STITCH AND FOLD,
A4R, 3 SHEETS ORIGINALS, 2 SETS 1:1,
1-1 MODE)
PI-108 TIMING CHART (AUTO PAPER FEED
(ONLINE), 2 STAPLES MODE, A4, 2 SHEETS
ORIGINALS, 2 SETS)
7. INSTALLATION INSTRUCTIONS
APPENDIX
7085 OVERALL WIRING DIAGRAM
PARTS GUIDE MANUAL
7075 7075 /
7075HV
JANUARY 2004
?? ??? ?? ??
No. Description Model Pagination Remarks
1 MAIN MACHINE 7075/7075HV 78
2 ADF DF-313 13
3 LCT LT-401 10
4 LCT LT-411 9
5 FINISHER FS-108 20
6 FINISHER FS-108BM 28
7 COVER FEEDER PI-108 5
8 TRIMMER TU-108 14
9 PUNCH UNIT PU-108 9
10 PUNCH UNIT PZ-108 11
GENERAL CONTENTS
PARTS GUIDE MANUAL
JULY 2008
7085/7085HV
7085/7085HV
SYSTEM OUTLINE
PI-108 (2)
FS-211
FS-111
TU-108
PZ-109
PZ-108
DF-317 7085HV
LT-412
FS-211S
PU-109
PU-108
IP-602M
7085/7085HV
GENERAL CONTENTS
No. Description Model
1 OTHER OPTION PI-108(2)
2 DIGITAL MFP B/W 7085/7085HV
3 OTHER OPTION TU-108
4 PUNCH UNIT PU-108
5 OTHER OPTION PZ-108
6 PAPER FEEDER LT-412
7 PAPER FEEDER LT-402
8 PRINT CONTROLLER IP-602/IP-602M
9 OTHER OPTION VI-602
10 DOCUMENT FEEDER DF-317
11 SORTER/FINISHER FS-111
12 SORTER/FINISHER FS-211
13 SORTER/FINISHER FS-211S


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.