Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Konica-minolta
  • Models included:
    • Konica-Minolta Magicolor 3300

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English
  • Number of pages:   518
  • File size:  ∼ 10.12  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMKM-1021

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

1750069-001B
4.4 Laser beams
•If your eyes are exposed to laser beams, you may lose your eyesight.
•Never open the cover if warning label for laser beams is attached there.
•Before disassembling and reassembling this laser printer, be sure to turn it OFF.
•When servicing this laser printer while it is running, be sure to follow the
procedures specified in this manual.
•You should understand the features of the laser beams which are capable of
having an injurious action on the human body, not to extend the danger over the
workers as well as other people around the printer.
Laser beams have features as follows:
•Frequencies are smaller in width than other beams (sun and electric bulbs) and
phases are uniform so that high monochromatic and convergence performance
can be obtained and thin beams of light can reach places at a long distance.
•Due to the high convergence, beams are concentrated in high density and high
temperature, which is dangerous to human body.
Reference: Laser beams of this laser printer is invisible rays which you cannot see.
Contents
Table of Contents
1. Trademarks
Introduction
1. About this manual
2. Marks giving caution
3. Related documents
4. Safety
4.1 Power source
4.2 Driving units
4.3 High-temperature units
4.4 Laser beams
4.5 Warning/caution labels
Contents
Chapter 1 Troubleshooting
1. Progressing with the Troubleshooting
1.1 Flow of Troubleshooting
1.2 Preparatory Requirements
1.3 Cautions for Service Operations
1.4 Cautions for FIP Use
2. Level 1 FIP
2.1 Level 1 FIP
2.2 Flow of Level 1 FIP
3. Level 2 FIP
3.1 Level 2 FIP
3.2 Error / Status Code List
3.3 Operating / Clearing the Error / Status Code
3.4 Error Code FIPs
3.5 Image Troubleshooting
3.6 Roller Circumferences
3.7 Other FIP
4. Preventive Maintenance
Chapter 2 Operation of Diagnostics
1. Diagnosis for Standalone Printer
1.1 General
1.2 Printing Method
1.3 Test Print Pattern
2. Diagnosis by Diagnostic Commander
2.1 General
2.2 Preparation
2.3 Operation of Diagnostic Commander
2.4 Test Print
2.5 Input Test
2.6 Output Test
2.7 Operation of EEPROM
2.8 firmware
Chapter 3 Removal and Replacement Procedures
1. Removal and Replacement Procedures
1.1 Before starting service work
1.2 Description of procedures
RRP1. COVERS
RRP1.1 CONSOLE PANEL HIBANA (PL1.1.1)
RRP1.2 COVER ASSY FRONT HEAD (PL1.1.2)
RRP1.3 FAN FUSER (PL1.1.7)
RRP1.4 COVER TOP MAIN (PL1.1.9)
RRP1.5 COVER ASSY TOP PHD (PL1.1.10)
RRP1.6 COVER REAR (PL1.1.20)
RRP1.7 LINK:L (PL1.1.23)
RRP1.8 LINK:R (PL1.1.23)
RRP1.9 COVER SIDE R (PL1.1.24)
RRP1.10 COVER ASSY FRONT IN (PL1.1.25)
RRP1.11 COVER MSI (PL1.1.26)
RRP1.12 TRAY ASSY BASE (PL1.1.28)
RRP1.13 COVER ASSY FRONT (PL1.1.29)
RRP1.14 COVER SIDE L (PL1.1.30)
RRP2. PAPER CASSETTE
RRP2.1 ROLL ASSY RETARD (PL2.1.2)
RRP2.2 HOLDER RETARD (PL2.1.4)
RRP2.3 CASSETTE ASSY FRONT (REFERENCE ONLY)
RRP3. PAPER FEEDER
RRP3.1 CHUTE ASSY TURN (PL3.1.2)
RRP3.2 COVER CASSETTE (PL3.1.3)
RRP3.3 FEEDER ASSY UNIT (REFERENCE ONLY)
RRP3.4 HOUSING ASSY FEEDER L (REFERENCE ONLY)
RRP3.5 HOUSING ASSY FEEDER R (REFERENCE ONLY)
Table of Contents
RRP3.6 SENSOR HUM TEMP (PL3.2.2)
RRP3.7 HARNESS ASSY OPFREC (PL3.2.3)
RRP3.8 SWITCH ASSY SIZE (PL3.2.4)
RRP3.9 LEVER LOW PAPER (PL3.2.7)
RRP3.10 INDICATOR (PL3.2.8)
RRP3.11 GUIDE INDICATOR (PL3.2.10)
RRP3.12 PICKUP ASSY (PL3.3.1)
RRP3.13 ROLL ASSY FEED (PL3.3.3)
RRP3.14 SENSOR PHOTO:NO PAPER (PL3.3.4)
RRP3.15 SENSOR PHOTO:LOW PAPER (PL3.3.4)
RRP3.16 ACTUATOR NO PAPER (PL3.3.5)
RRP3.17 LINK ACTUATOR (PL3.3.6)
RRP3.18 SOLENOID FEED (PL3.3.17)
RRP3.19 CLUTCH ASSY TURN (PL3.3.18)
RRP3.20 ROLL ASSY TURN (PL3.3.20)
RRP3.21 ROLL ASSY (PL3.3.23)
RRP4. HOUSING ASSY RETARD
RRP4.1 HOUSING ASSY RETARD (PL4.1.1)
RRP4.2 ROLL TURN (PL4.1.2)
RRP4.3 ROLL ASSY RETARD MSI (PL4.1.5)
RRP4.4 CLUTCH TURN (PL4.1.9)
RRP4.5 STUD RTD (PL4.1.10)
RRP5. CHUTE ASSY IN
RRP5.1 CHUTE ASSY IN (PL5.1.1)
RRP5.2 SENSOR ADC ASSY (PL5.1.11)
RRP5.3 SENSOR TONER FULL (PL5.1.13)
RRP5.4 FUSER DRIVE ASSY (PL5.1.18)
RRP5.5 LATCH R (PL5.1.21)
RRP5.6 LATCH L (PL5.1.30)
RRP6. CHUTE ASSY OUT
RRP6.1 CHUTE ASSY OUT (PL6.1.1)
RRP6.2 SENSOR PHOTO:FULL STACK (PL6.1.4)
RRP6.3 ACTUATOR FULL (PL6.1.5)
RRP6.4 SENSOR PHOTO:DUP (PL6.1.4)
RRP6.5 SENSOR PHOTO:MSI (PL6.1.4)
RRP6.6 BRACKET ASSY ELIMINATOR (PL6.1.9)
RRP6.7 ROLL DUP (PL6.1.12)
RRP6.8 ACTUATOR DUP (PL6.1.13)
RRP6.9 LATCH OUT (PL6.1.18)
RRP6.10 ROLL ASSY FEED MSI(PL6.1.27)
RRP6.11 ACTUATOR MSI (PL6.1.37)
RRP6.12 SOLENOID FEED MSI (PL6.1.40)
RRP6.13 SHAFT ASSY ROLL FEED (REFERENCE ONLY)
RRP6.14 PLATE ASSY BOTTOM MSI (PL6.1.42)
RRP7. CHUTE ASSY EXIT
RRP7.1 CHUTE ASSY EXIT (PL7.1.1)
RRP7.2 ROLL EXIT (PL7.1.4)
RRP7.3 ROLL MID (PL7.1.5)
RRP7.4 MOTOR ASSY DUP (PL7.1.8)
RRP8. BTR ASSY & FUSER
RRP8.1 FUSER ASSY (PL8.1.1)
RRP8.2 ROLL ASSY EXIT (REFERENCE ONLY)
RRP8.3 ACTUATOR EXIT (PL8.1.7)
RRP8.4 BTR PKG 72 (PL8.1.12)
RRP8.5 STRAP (PL8.1.13)
RRP9. XEROGRAPHICS
RRP9.1 ROS ASSY (PL9.1.1)
RRP9.2 HSG ASSY BIAS (PL9.1.4)
RRP9.3 CHUTE ASSY REGI (PL9.1.6)
RRP9.4 SENSOR PHOTO:REGI (PL9.1.8)
RRP9.5 ACTUATOR REGI (PL9.1.9)
RRP9.6 SENSOR PHOTO:OHP SENSOR (PL9.1.8)
RRP10. TCRU ASSY
RRP10.1 HOLDER ASSY TONER HBN UNIT (REFERENCE ONLY)
RRP10.2 HOLDER ASSY TONER HBN Y (PL10.1.1)
RRP10.3 HOLDER ASSY TONER HBN M (PL10.1.2)
RRP10.4 HOLDER ASSY TONER HBN C (PL10.1.3)
RRP10.5 HOLDER ASSY TONER HBN K (PL10.1.4)
RRP10.6 ACTUATOR TCRU ASSY (PL10.1.6)
RRP10.7 SENSOR NO TONER (PL10.1.5)
RRP10.8 PWBA EEPROM (PL10.1.14)
RRP10.9 S-HVPS (PL10.1.15)
RRP10.10 BOX ASSY CRUM READER(PL10.1.21)
RRP11. FRAME & DRIVE
RRP11.1 LEVER DRUM:L (PL11.1.4)
RRP11.2 LEVER DRUM:R (PL11.1.4)
RRP11.3 ACTUATOR I/R (PL11.1.8)
RRP11.4 DEVE DRIVE ASSY (PL11.1.13)
RRP11.5 MAIN DRIVE ASSY (PL11.1.14)
RRP11.6 PWBA ASSY EARTH (PL11.1.16)
RRP12. ELECTRICAL
RRP12.1 PWBA MCU HBN (PL12.1.1)
RRP12.2 FAN REAR (PL12.1.2)
RRP12.3 CONTROLLER BOARD (PL12.1.4)(TBD)
RRP12.4 LVPS (PL12.1.10)
RRP12.5 HARNESS ASSY AC SW (PL12.1.11)
RRP12.6 PWBA DRV HBN (PL12.1.12)
RRP12.7 BOX ASSY MCU/ESS (REFERENCE ONLY)
Table of Contents
RRP12.8 HOUSING ASSY CONTACT (PL12.1.14)
Chapter 4 Plug/Jack (P/J) Connector Locations
1. Connector [P (plug) / J (jack)]
1.1 List of P/J
1.2 P/J layout diagram
Chapter 5 Parts List
1. Parts List
1.1 Caution for use of parts list
Chapter 6 Principles of Operation
1. Printing Process
1.1 Summary of Printing Process
1.2 Schematic Diagram for Printing Processes
1.3 Description of Printing Process Techniques
2. Flow of Print Data
2.1 Data Flow
3. Drive Transmission Route
3.1 MAIN DRIVE ASSY
3.2 DEVE DRIVE ASSY
3.3 HOLDER ASSY TONER HBN (Y, M, C, K)
3.4 FUSER DRIVE ASSY
3.5 MOTOR ASSY DUP
3.6 GEAR • LAYOUT
4. Paper Transport
4.1 Paper Transport Route (without option)
4.2 Layout of Paper Transfer Route
5. Functions of Major Functional Components
5.1 Paper Cassette
5.2 Paper Feeder
5.3 Housing Assy Retard
5.4 Front Assy In
5.5 Chute Assy Out
5.6 Chute Assy Exit
5.7 BTR Assy & Fuser
5.8 Xerographics
5.9 TCRU Assy
5.10 Frame & Drive
5.11 Electrical
6. MODES
6.1 Print Mode
6.2 Operation Modes
7. Control
7.1 Control of Paper Size
7.2 Selective Control on Paper Pick-up Unit
7.3 ROS Light Quantity Control
7.4 Process Control
7.5 Color Registration Control
7.6 BTR Assy Control
7.7 Toner Control
7.8 Fuser Control
Chapter 7 Wiring Diagrams and Signal Information
1. General Wiring Diagram
2. Wiring Diagram between Parts
2.1 Configuration
2.2 Notes on Using the Wiring Diagram between Parts
Chapter 8 Printer Specifications
1. Configuration of Printer
1.1 Basic Configuration
1.2 Functional Configuration
2. Electrical Properties
2.1 Power Source
2.2 Power Consumption
3. Mechanical Properties
3.1 Dimensions/Mass of Printer
3.2 Dimensions/Mass of Universal Paper Tray (standard paper supply - 500 sheets)
3.3 Dimensions/Mass of Consumables (CRU)
3.4 Installation Space (min. installation space)
4. Functions
4.1 Recording System
4.2 Exposure System
4.3 Development System
4.4 Fixing System
4.5 Resolution
4.6 Operation Mode
4.7 Process Speed
Table of Contents
4.8 Print Mode
4.9 Paper Mode
4.10 Warm-up Time
4.11 FPOT (First Print Output Time)
4.12 Continuous Printing Speed
4.13 Printing Area
4.14 Input Properties
4.15 Output Properties
4.16 Paper
5. Consumables
5.1 Items of Consumables
5.2 Consumable Life
5.3 Parts Requiring Periodical Replacement
6. Operating Environment
6.1 Installation Temperature / Humidity
6.2 Installation Altitude
6.3 Installation Horizontality
6.4 Ambient Lighting
7. Safety / Environment Conditions
7.1 Safety Standard
7.2 Laser Safety Standard
7.3 EMI
7.4 Noise
8. Print image Quality
8.1 Image Quality Guarantee Conditions
9. Option
9.1 Options to be Installed by Users
Chapter 1 Troubleshooting
Chapter 3 Removal and Replacement Procedures
Chapter 4 Plug/Jack (P/J) Connector Locations
Chapter 5 Parts List
PL 1.1 Cover [Illustration]
Chapter 6 Principles of Operation
Chapter 7 Wiring Diagrams and Signal Information
Chapter 8 Printer Specifications
AC Switch 448
ACTUATOR DUP removal 262
ACTUATOR EXIT removal 288
ACTUATOR FULL removal 252
ACTUATOR I/R removal 334
ACTUATOR MSI removal 268
ACTUATOR NO PAPER removal 210
ACTUATOR REGI removal 302
ACTUATOR TCRU ASSY removal 320
ADC (Auto Density Control) 453
ADC ADC Sensor Dustiness Error 71
ADC Sensor 434
ADC Sensor Dustiness Warning 59
Adjust Input Bin 83
Admix Mode 454
Agitator 410
Altitude Specification 508
Ambient Lighting 508
Bias Transfer Roller 416
Black Box Diagnostics 119
Black Toner Cartridge Missing 43
Black Toner Empty 88
Black Toner Low 67
BOX ASSY CRUM READER removal 328
BOX ASSY MCU/ESS removal 354
BRACKET ELIMINATOR ASSY removal 258
BTR 416
BTR Assy & Fuser Functions 440
BTR Assy Control 456
BTR cleaner 419
BTR Life 456
BTR PKG 72 440
BTR UNIT ASSY removal 290
Call for Service CRUM ID Error 47
CASSETTE ASSY FRONT removal 178
Cassette Section Wiring 470
SWITCH ASSY SIZE 471
Cautions x
Cautions for Service Operations 27
Charging 407
Chute Assy Exit
MOTOR ASSY DUP 438
ROLL EXIT 438
ROLL MID 438
Chute Assy Exit Function 438
CHUTE ASSY EXIT removal 276
CHUTE ASSY IN removal 232
Chute Assy Out
ROLL ASSY FEED 436
ROLL DUP 436
SENSOR PHOTO (Dup Jam Sensor) 436
SENSOR PHOTO (Full Stack Sensor) 436
SENSOR PHOTO (MSI No Paper Sensor) 436
SOLENOID FEED MSI 436
Chute Assy Out Function 436
CHUTE ASSY OUT removal 246
CHUTE ASSY REGI removal 298
CHUTE ASSY TURN removal 180
Cleaning (general) 418
Cleaning (IDT 1) 414
Cleaning (IDT 2) 416
CLUTCH ASSY TURN 430
CLUTCH ASSY TURN removal 216
CLUTCH TURN removal 228
Color Registration Control 455
Commander Diagnostics 119
Communication log files 122
Configuration of Printer 495
Configuring Diagnostics 119
Connectors
FIPs 28
CONSOLE PANEL removal 146
Consumable Life 507
Consumables Specifications 507
Control of Paper Size 451
Controller 448
CONTROLLER BOARD removal 346
Controller Section Wiring 490
Cool down 458
COVER ASSY FRONT HEAD removal 148
COVER ASSY FRONT IN removal 164
COVER ASSY FRONT removal 170
COVER ASSY TOP PHD removal 154
COVER CASSETTE REAR removal 182
COVER MSI removal 166
COVER REAR removal 156
COVER SIDE L removal 172
COVER SIDE R removal 162
COVER TOP MAIN removal 152
CRUM ID Error 47
Cyan Toner Cartridge Missing 42
Cyan Toner Empty 87
Cyan Toner Low 66
Detack Saw 416
DEVE DRIVE ASSY 446
DEVE DRIVE ASSY removal 336
Developer Section Wiring 476
Developing Bias 410
Development 410
Agitator 410
Magnet Roll 410
Development Drive Transmission 422
DIAG PWB 119
Diagnostic Functions 122
Diagnostic Interface 119
Diagnostics 117
Configuration 119
EEPROM 130
Functions 122
Hibana Service Commander 119
Holder Toner Assy 138
Initial Screen 121
Initialize Slave 136
Input Tests 125
Installation 120
Life Counters 137
Log Files 122
Operation 121
Output Tests 127
Read Slave 136
Save Life / Adjustment Data 133
Save NVM Data 131
Slave 135
Software 119
Test Print Pattern 118
Text File 131
Write Life / Adjustment Data 134
Write NVM Data 132
Dimensions/Mass of Consumables 497
Dimensions/Mass of Printer 497
Direct Read/Write EEPROM 130
Drive Section Wiring 472
DEVE DRIVE ASSY 473
FUSER DRIVE 474
MAIN DRIVE ASSY 473
MOTOR ASSY DUP 474
Drive Transmission 421
Driver Board 448
Drum 407
Dup Jam Sensor 436
Duplex Jam 54
Electrical
CONTROLLER BOARD 448
FAN REAR 448
HARNESS ASSY AC SW 448
LVPS 448
PWBA HNB DRV 448
Electrical Function 448
Electrical Specifications 496
End Guide 428
Engine Test Print 117
ENV Sensor Error 63
Environment Sensor 430
Environment Specifications 508
Executing output test 127
Exit Sensor 440
Exposure 408
FAN FUSER 440
FAN FUSER removal 150
Fan Motor Error 60
FAN output circuit 469
FAN REAR removal 344
Feed Jam 49
FEEDER ASSY UNIT removal 184
Fine mode 450
ADC Sensor Dustiness (ADC ADC Sensor Dusti-
ness Error) 71
ADC Sensor Error (ADC Sensor Dustiness Warn-
ing) 59
Black Toner Cartridge Detached (Black Toner Car-
tridge Missing) 43
Black Toner Empty (Black Toner Low) 67
Black Toner Empty 2 (Black Toner Empty) 88
BTR Detached (Transfer Unit Missing) 45
BTR Life Over (Replace Transfer Unit) 69
CRUM ID Error (Call for Service CRUM ID Error) 47
Cyan Toner Cartridge Detached (Cyan Toner Car-
tridge Missing) 42
Cyan Toner Empty (Cyan Toner Low) 66
Cyan Toner Empty 2 (Cyan Toner Empty) 87
Duplex Jam (Media Jam Duplex) 54
Environment Sensor Error (Call for Service ENV
Sensor Error) 63
Fan Motor Failure (Call for Service Fan Motor Error)
Feed Jam (Media Jam Feed) 49
Firmware Error (Call for Service Firmware Error) 62
Front Cover (Front Cover Open) 72
Full Stack (Output Bin Full) 84
Fuser Detached (Fuser Unit Missing) 46
Fuser Failure (Call for Service Fuser Failure) 57
Fuser Jam (Media Jam Fuser)Media Jam Fuser 53
Fuser Life Over (Replace Fuser Unit) 70
Level 2 31
Magenta Toner Cartridge Detached (Magenta Ton-
er Cartridge Missing) 41
Magenta Toner Empty (Magenta Toner Low) 65
Magenta Toner Empty 2 (Magenta Toner Empty)
Media Type Mismatch (Media Type Mismatch) 48
NV-RAM Error (Call for Service NVRAM Error) 58
P1 Light (Undertoned) Prints 98
P10 Unfused Image or Image Easily Rubs off of
Page 107
P2 Blank Prints 99
P3 Black Prints 100
P4 Vertical Band Deletions 101
P5 Horizontal Band Deletions 102
P6 Black (color) spots 103
P7 Background 104
P8 Skewed Image 105
P9 Crease 106
PHD Detached (Imaging Unit Missing) 44
PHD Life Over (Replace Imaging Unit) 68
Regi Jam (Media Jam Registration) 52
ROS Failure (Call for Service ROS Motor) 56
Upper Cassette Detached (Adjust Input Bin) 83
Yellow Toner Cartridge Detached (Yellow Toner
Cartridge Missing) 40
Yellow Toner Empty (Yellow Toner Low) 64
Yellow Toner Empty 2 (Yellow Toner Empty) 85
Cautions for FIP Use 28
Firmware Error 62
Fixing 417
Flow of Print Data 420
Frame & Drive Function 446
Front Assy In
FUSER DRIVE ASSY 434
SENSOR ADC ASSY 434
SENSOR TNR FULL 434
Front Assy In Function 434
Front Cover Open 72
Full Stack Sensor 436
Functions Specifications 500
FUSER ASSY 440
FUSER ASSY removal 284
FUSER DRIVE ASSY removal 240
Fuser Failure 57
Fuser Jam 53
Fuser Section Wiring 480
Fuser temperature control 458
Fuser Unit Missing 46
Fusing 417
Gear Layout 424
General Cleaning 418
General Wiring Diagram 461
GUIDE INDICATOR removal 200
HARNESS ASSY AC SW removal 350
HARNESS ASSY OPFREC removal 192
High Area Coverage Mode 454
High Gloss mode 450
Holder Assy Toner Hbn (Y, M, C, K) 422
HOLDER ASSY TONER HBN C removal 316
HOLDER ASSY TONER HBN K removal 318
HOLDER ASSY TONER HBN M removal 314
HOLDER ASSY TONER HBN Y removal 312
HOLDER RETARD removal 176
HOLDER TCRU ASSY UNIT removal 308
Holder Toner Assy 138
HOUSING ASSY CONTACT removal 356
HOUSING ASSY FEEDER L removal 186
HOUSING ASSY FEEDER R removal 188
Housing Assy Retard
MSI Turn Clutch 432
ROLL TURN 432
Housing Assy Retard Function 432
HOUSING ASSY RETARD removal 222
HSG ASSY BIAS removal 296
Humidity Sensor 430
IDT 1 412
IDT 2 414
Image Trouble FIP 96, 97
Imaging Unit 406
Imaging Unit Missing 44
INDICATOR removal 198
Initialize Slave 136
Input Test 125
Installation Altitude 508
Installation Horizontality 508
Installation Space 499
Installation Temperature/Humidity 508
Installing Diagnostics 120
Interlock Switch 448
Laser Unit 408
LATCH L removal 244
LATCH OUT removal 264
LATCH R removal 242
LED Light Quantity Control 454
Level 1 FIP 30
Level 2 FIP 31
LEVER DRUM L removal 330
LEVER DRUM R removal 332
LEVER LOW PAPER removal 196
Life Counters 137
LINK ACTUATOR removal 212
LINK L removal 158
LINK R removal 160
List of Plug/Jacks 361
Low Paper Sensor 430
LOW PAPER sensor removal 208
LVPS 448
LVPS overcurrent protection circuit 469
LVPS overvoltage protection circuit 469
LVPS removal 348
Magenta Toner Cartridge Missing 41
Magenta Toner Empty 86
Magenta Toner Low 65
Magnet Roller 410
MAIN DRIVE ASSY 446
MAIN DRIVE ASSY removal 338
Main Drive Transmission 421
Major Component Functions 427
BTR Assy & Fuser 440
Chute Assy Exit 438
Chute Assy Out 436
Electrical 448
Frame & Drive 446
Front Assy In 434
Housing Assy Retard 432
Paper Cassette 428
Paper Feeder 430
TCRU Assy 444
Xerographics 442
MCU removal 342
Mechanical Drive 421
Mechanical Specifications 497
Media Jam Duplex 54
Media Jam Feed 49
Media Jam Registration 52
Media Type Mismatch 48
MOTOR ASSY DUP 438
MOTOR ASSY DUP removal 282
MSI No Paper Sensor 436
MSI Turn Clutch 432
No Paper Sensor 430
NO PAPER sensor removal 206
NVRAM Error 58
OHP SENSOR ASSY 442
OHP SENSOR ASSY removal 304
OPC 407
Operation of Diagnostics 115, 121
Operation of EEPROM 130
Option Specifications 510
Output Bin Full 84
Output stop by I/L Switch 469
Output Test Types 128
Output Tests 127
Paper Cassette Function 428
Paper Feed Section Wiring 488
Paper Feeder
CLUTCH ASSY TURN 430
ROLL ASSY FEED 430
ROLL ASSY TURN 430
SENSOR HUM TEMP 430
SENSOR PHOTO (Low Paper Sensor) 430
SENSOR PHOTO (No Paper Sensor) 430
SOLENOID FEED 430
SWITCH ASSY SIZE 430
Paper Feeder Function 430
Paper Size Control 451, 471
Paper specifications 506
Paper Transport 425
Parts List 369
BTR Assy & Fuser 390
Chute Assy Exit 388
Chute Assy In 384
Chute Assy Out 386
Electrical 398
Frame & Drive 396
Harness 400
Housing Assy Retard 382
Paper Cassette 374
Paper Feeder I 376
Paper Feeder II 378
Paper Feeder III 380
TCRU Assy 394
Xerographics 392
Patches 452
PCDC (Pixel Count Dispense Control) 453
Periodic Replacement 507
PHD Assembly 406
PHD ASSY 442
Photoconductor 407
PICKUP ASSY removal 202
PLATE ASSY BOTTOM MSI removal 274
Plug/Jack (P/J) Connector Locations 359
Plug/Jack layout diagram 364
Potential Control 452
Power Consumption 496
Power Source 496
Primary transfer 412
IDT 1 412
Principles of Operation 403
Print Head Assembly 442
Print image Quality Specifications 510
Printer Specifications 493
Printing Process
Charging with electricity 407
Cleaning (general) 418
Cleaning (IDT 1) 414
Cleaning (IDT 2) 416
Development 410
Exposure 408
Fixing 417
Primary transfer 412
Schematic Diagram 406
Secondary transfer 414
Static elimination 416
Summary 405
Tertiary transfer 416
Process Control 452
PWBA ASSY EARTH removal 340
PWBA EEPROM 444
PWBA EEPROM removal 324
PWBA HNB DRV 448
PWBA HNB DRV removal 352
PWBA HNB MCU removal 342
Read Slave 136
Refresher 407
Registration Clutch 442
Registration Jam 52
Registration Sensor 442
Removal and Replacement Procedures 141
BTR ASSY & FUSER 284
CHUTE ASSY EXIT 276
CHUTE ASSY IN 232
CHUTE ASSY OUT 246
COVERS 146
Description of procedures 144
ELECTRICAL 342
FRAME & DRIVE 330
HOUSING ASSY RETARD 222
PAPER CASSETTE 174
PAPER FEEDER 180
TCRU ASSY 308
XEROGRAPHICS 294
Replace Fuser Unit 70
Replace Imaging Unit 68
Replace Transfer Unit 69
ROLL ASSY (Paper Cassette) 428
ROLL ASSY EXIT removal 286
ROLL ASSY FEED 430, 436
ROLL ASSY FEED removal 204, 266
ROLL ASSY removal 174, 220
ROLL ASSY RETARD removal 226
ROLL ASSY TURN 430
ROLL ASSY TURN removal 218
ROLL DUP 436
ROLL DUP removal 260
ROLL EXIT 438
ROLL EXIT removal 278
ROLL MID 438
ROLL MID removal 280
ROLL TURN 432
ROLL TURN removal 224
Roller Circumferences 97
ROS Assembly 408
ROS ASSY 442
ROS ASSY removal 294
ROS Light Quantity Control 451
ROS Motor Error 56
ROS Section Wiring 482
RTC (Rubber Tube Charge) 407
Safety vi
Safety / Environment Specifications 509
Save Life / Adjustment Data 133
Save NVM Data 131
Secondary transfer 414
IDT 2 414
SENSOR ADC ASSY removal 236
SENSOR HUM TEMP removal 190
SENSOR NO TONER 444, 457
SENSOR NO TONER removal 322
SENSOR PHOTO duplex removal 254
SENSOR PHOTO FULL STACK removal 250
SENSOR PHOTO MSI removal 256
SENSOR PHOTO REGI removal 300
SENSOR TONER FULL removal 238
SHAFT ASSY ROLL FEED removal 272
Shorting Pins for Test Print 117
S-HVPS 444
S-HVPS removal 326
Side Guide 428
Slave 135
SOLENOID FEED 430
SOLENOID FEED MSI 436
SOLENOID FEED MSI removal 270
SOLENOID FEED removal 214
Specifications
Consumable Life 507
Consumables 507
Continuous Printing Speed 503
Development System 500
Electrical 496
Environment 508
Exposure System 500
First Print Output Time 502
Fixing System 500
Functions 500
Input Properties 505
Mechanical 497
Operation Mode 500
Option 510
Output Properties 505
Paper 506
Paper delivery capacity 505
Paper Mode 501
Paper pick-up capacity 505
Paper size 506
Periodic Replacement 507
Print image Quality 510
Print Mode 501
Printing Area 504
Process Speed 501
Recording System 500
Resolution 500
Safety / Environment 509
Warm-up Time 502
Standard mode 450
Static elimination 416
STRAP removal 292
STUD RTD removal 230
Super high gloss mode 450
SWITCH ASSY SIZE 430
SWITCH ASSY SIZE removal 194
Tandem System 405, 455
PWBA EEPROM 444
SENSOR NO TONER (Y,M,C,K) 444
S-HVPS 444
TCRU Assy Function 444
Temperature Sensor 430
Temperature/Humidity Specification 508
Tertiary Transfer
BTR 416
Tertiary transfer 416
Test Print 117, 123
Test Print Pattern 118
Theory of Operation 403
Toner Control 457
Toner Density Control 453
Toner Empty Error 457
Toner Empty Warning 457
Trademarks ii
Transfer Unit Missing 45
TRAY ASSY MSI removal 168
Troubleshooting 23, 96, 97
Clearing the Error 35
Error / Status Codes 31
FIPs 28
Level 1 FIP 30
Level 2 FIP 31
Preparation 26
Types of input test 125
Types of output tests 128
Unpacking the Printer xi
Warm-up Time 502
Waste Toner Collection 419
Wiring Diagram
Controller section 464
Developer section 1 463
Developer section 2 463
Drive section 463
Fuser section 464
Paper feed section 464
Power supply 463
ROS section 464
Xerographics section 2 464
Xerographics section1 464
Wiring Diagrams and Signal Information 459
Write Life / Adjustment Data 134
Write NVM Data 132
Xerographics
CHUTE REGI (Regi Clutch) 442
OHP SENSOR ASSY 442
PHD ASSY 442
ROS ASSY 442
SENSOR PHOTO (Regi Sensor) 442
Xerographics Function 442
Xerographics Wiring 484, 486
Yellow Toner Cartridge Missing 40
Yellow Toner Empty 85
Yellow Toner Low 64


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.