Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Kyocera-mita
  • Models included:
    • Kyocera-Mita FS-6020

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   184
  • File size:  ∼ 10.50  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMKT-1037

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

SERVICE
MANUAL
Published in November 2004
Revison 2
FS-6020
CONTENTS
1-1 Specifications
1-1-1 Specifications
1-1-2 Parts names
(1) Printer
(2) Operation panel
1-1-3 Machine cross section
1-1-4 Drive system
(1) Drive system
1-2 Handling Precautions
1-2-1 Process unit
1-2-2 Toner container
1-2-3 Installation environment
1-3 Installation
1-3-1 Unpacking and installation
(1) Installation procedure
1-3-2 Installing expansion memory (optional)
1-3-3 Installing network interface card (optional)
1-3-4 Installing hard disk unit (optional)
1-3-5 Installing memory card (optional)
1-4 Service Mode
1-4-1 Service mode
(1) Executing service mode
1-5 Troubleshooting
1-5-1 Paper misfeed detection
(1) Paper misfeed indication
1-5-2 Self-diagnosis
(1) Self-diagnostic function
(1-1) Error code 2000 [E1] (main motor error)
(1-2) Error code 4000 [E2] (polygon motor error)
(1-3) Error code 4200 [E3] (laser output error)
(1-4) Error code 6000 [E4] (fixing heater lamp/fixing thermistor error)
(1-5) Error code 6020 [A2] (abnormally high fixing temperature error)
(1-6) Error code 6400 [A0] (fixing heater lamp control zero-cross signal detection error)
(1-7) Error code F0 [F0]
(communication error between the operation panel PWB and main PWB)
(1-8) Error code F010 [F1] (code ROM checksum error)
(1-9) Error code F020 [F2] (main PWB RAM checksum error)
(1-10) Error code F030 [F3] (main PWB controller error)
(1-11) Error code F040 [E0]
(communication error between engine/high voltage PWB and main PWB controller)
(1-12) Error code F050 [E6] (engine/high-voltage flash memory checksum error)
(1-13) Error code F080 [E6] (system firmware download error)
(1-14) Error code 0420 [C0]
(serial communication error between paper feeder and engine/high voltage PWB)
(1-15) Error code 1210 [C2] (duplexer slide guide home position detection error)
(1-16) Error code 2610 [B2] (paper feeder 1 feed motor error)
(1-17) Error code 2620 [B3] (paper feeder 2 feed motor error)
(1-18) Error code 2630 [B4] (paper feeder 3 feed motor error)
(1-19) Error code 2640 [B5] (paper feeder 4 feed motor error)
FS-6020
1-5-3 Electrical problems
(1) Even if the top cover is closed, the message “Close top cover” remains
(2) Even if the rear cover is closed, the message “Close rear cover” remains.
(3) The message “Paper Jam” remains.
(4) The message “Face-down tray paper full” remains.
(5) The paper size is not recognized as the size set with the paper size dial of the cassette.
(6) The message “Self test” remains when the printer is started.
(7) No message is displayed when the power switch is turned on. (All dots of LCD are on.)
(8) No message is displayed when the power switch is turned on. (All dots of LCD are off.)
1-5-4 Image formation problems
(1) No image appears. (entirely white)
(2) No image appears. (entirely black)
(3) Image is light as a whole.
(4) Background is gray.
(5) A white line appears longitudinally.
(6) A black line appears longitudinally.
(7) A black line appears laterally.
(8) One side of the print image is darker than the other.
(9) Black dots appear on the image.
(10) Image blurs.
(11) Image is displaced toward the rear side of paper.
(12) Paper creases.
(13) Offset occurs.
(14) Image is partly missing.
(15) Fixing is poor.
(16) Image becomes dim.
(17) Image is inclined.
1-6 Assembly and Disassembly
1-6-1 Precautions for assembly and disassembly
(1) Precautions
1-6-2 Covers
(1) Detaching and refitting the top cover
(2) Detaching and refitting the left cover
(3) Detaching and refitting the right cover
(4) Detaching and refitting the rear cover
(5) Detaching and refitting the front cover
1-6-3 Paper feed section
(1) Detaching and refitting the feed and pickup rollers
(2) Detaching and refitting the paper feed unit
(3) Detaching and refitting the MP tray feed roller
(4) Detaching and refitting the MP tray feed unit
(5) Detaching and refitting the retard roller
(6) Detaching and refitting the drive assembly
1-6-4 Laser scanner unit section
(1) Detaching and refitting the laser scanner unit
1-6-5 Process unit section
(1) Detaching and refitting the main charger unit
1-6-6 Transfer/separation section
(1) Detaching and refitting the transfer roller and separation charger unit
1-6-7 Fixing section
(1) Detaching and refitting the fixing unit
(2) Detaching and refitting the fixing heater lamp
(3) Detaching and refitting the heat roller
(4) Detaching and refitting the press roller
(5) Detaching and refitting the fixing thermistor and separator
(6) Detaching and refitting the fixing thermostat
FS-6020
1-6-8 PWBs
(1) Detaching and refitting the main PWB
(2) Detaching and refitting the engine/high voltage PWB
(3) Detaching and refitting the power source PWB
1-7 Firmware
1-7-1 Downloading firmware
(1) Format for the firmware files
(2) Downloading firmware via the parallel interface
(3) Downloading firmware using the memory card
(4) Downloading the message data
2-1 Mechanical construction
2-1-1 Paper feed/conveying section
(1) Paper feed section/paper cassette
(2) MP tray feed section
(3) Conveying section
2-1-2 Process unit section
(1) Development section
(2) Main charger/drum section
2-1-3 Laser scanner unit section
(1) Laser scanner unit
2-1-4 Transfer/separation section
2-1-5 Cleaning section
2-1-6 Fixing section
2-1-7 Face-down eject/feedshift section
2-2 Electrical Parts Layout
2-2-1 Electrical parts layout
(1) Main frame
(2) Process unit, laser scanner and fixing unit
2-3 Operation of the PWBs
2-3-1 Power source PWB
2-3-2 Engine/high voltage PWB
(1) Fixing heater lamp control circuit
(2) Fixing heater lamp lighting runaway prevention - fixing thermistor
disconnection detection circuit
(3) Interlock switch - eco-power circuit
(4) Optional equipment identification circuit
2-3-3 Main PWB
2-4 Appendixes
Timing chart No. 1 Paper cassette feeding, two A4 size papers
Timing chart No. 2 Paper cassette feeding, two A4R size papers
Timing chart No. 3 Paper cassette feeding, two A3 size papers
Timing chart No. 4 Paper cassette feeding, two B5 size papers
Timing chart No. 5 Paper cassette feeding, two B4 size papers
Timing chart No. 6 Paper cassette feeding, two letter size papers
Timing chart No. 7 Paper cassette feeding, two letter R size papers
Timing chart No. 8 Paper cassette feeding, two legal size papers
Timing chart No. 9 Paper cassette feeding, two ledger size papers
Timing chart No. 10 MP tray feeding, two A4 size papers
Timing chart No. 11 MP tray feeding, two A4R size papers
Timing chart No. 12 MP tray feeding, two A3 size papers
Timing chart No. 13 MP tray feeding, two B5 size papers
Timing chart No. 14 MP tray feeding, two B4 size papers
Timing chart No. 15 MP tray feeding, two letter R size papers
FS-6020
Timing chart No. 16 MP tray feeding, two letter size papers
Timing chart No. 17 MP tray feeding, two legal size papers
Timing chart No. 18 MP tray feeding, two ledger size papers
Timing chart No. 19 MP tray feeding, two custom size papers
Wiring diagram
Repetitive defects gauge
This page is intentionally left blank.
FS-6020
1-1-1 Specifications
Printing system
Recycled paper (60 to 90 g/m2)
Thick paper (90 to 105 g/m2)
MP tray: Plain paper (60 to 90 g/m2)
Recycled paper (60 to 90 g/m2)
Thick paper (90 to 200 g/m2)
Special paper: Transparencies, labels, envelopes, postcards, tracing paper
Printing sizes
B4 (257 364 mm)
A4R (210 297 mm)
A4 (297 210 mm)
B5 (257 182 mm)
Folio (210 182 mm)
Ledger (11" 17")
Legal (8.5" 14")
Letter-R (11" 8.5")
Letter (11" 8.5")
Non-standard size (148 to 297 mm 210 to 432 mm: cassette)
Non-standard size (70 to 148 mm 297 to 450 mm: MP tray)
Print speed
A4: 20 pages/minutes [20 images/minutes]
A3: 11 pages/minutes [11 images/minutes]
B4: 12 pages/minutes [12 images/minutes]
A4R: 15 pages/minutes [15 images/minutes]
B5: 17 pages/minutes [17 images/minutes]
A5: 20 pages/minutes [20 images/minutes]
Ledger: 11 pages/minutes [11 images/minutes]
Legal: 13 pages/minutes [13 images/minutes]
Letter: 20 pages/minutes [20 images/minutes]
Letter-R: 16 pages/minutes [16 images/minutes]
MP tray (in cassette mode)
A4: 20 pages/minutes
A3: 11 pages/minutes
B4: 12 pages/minutes
A4R: 15 pages/minutes
B5: 17 pages/minutes
A5: 20 pages/minutes
Ledger: 11 pages/minutes
Legal: 13 pages/minutes
Letter: 20 pages/minutes
Letter-R: 16 pages/minutes
First print time
Sleep mode: 22 seconds or less (A4) [when the EcoPower mode is on]
Standby mode: 12 seconds or less (A4) [when the EcoPower mode is off]
Sleep mode: 22 seconds or less (A4) [when the EcoPower mode is off]
Warm-up time
Power on: 60 seconds or less (room temperature 23 C, 60 % RH)
Paper feed system
Paper loading capacity
MP tray: 100 sheets (75 g/m2, 0.1 m)
Duplexer: No stack
Paper eject system
Photoconductor
Charging system
Exposure light source
Developing system
Developer: One-component magnetic toner
Toner replenishing: Automatic from the toner container
FS-6020
Transfer system
Separation system
Fixing system
Charge erasing system
Cleaning system
Controller hardware
Code ROM: 4 MB (32 Mbit 2)
Font ROM: 4 MB (32 Mbit 1)
Main RAM: 16 MB in standard configuration (on-board); can be expanded to 144 MB
(standard 16 MB + 128 MB) at the maximum by adding optional expansion memory
Optional expansion RAM: 1 slot
100-pin DIMM (16, 32, 64 or 128 MB)
Interface
USB: Full-Speed USB2.0
Serial (optional): RS-232C, maximum speed 115.2 Kbps
Serial interface board IB-11 must be installed.
Network (optional): 10 Base-TX/100 Base-TX/10 Base-2
Network interface card: IB-21 (10 Base-TX/100 Base-TX/10 Base-2)
Network interface card IB-21E (10 Base-TX/100 Base-TX)
Wireless LAN card IB-22 must be installed.
Controller software
(1) Standard
Line Printer
IBM Proprinter X24E
Epson LQ-850
Diablo 630
PCL6 (PCL5e + PCLXL protocol class 2.0)
(2) Option
Japanese KPDL3 (PostScript 3 compatible) UG-13
b) Fonts:
(1) Western fonts
Bitmap fonts: 1 Line Printer bitmap fonts
Outline fonts: 80 outline fonts
79 bitmap emulate downloadable font: Kyocera Mita format/HP format
c) Graphic:
(1) Raster graphic:
75, 100, 150, *200, 300, 600* dpi
(*200 dpi is supported when the resolution is 600 dpi.)
(2) Vector graphic:
Line, Box, Circle, Arc, Fill pattern etc.
(3) Bar code:
One-dimensional bar code: 45 types
Two-dimensional bar code: 1 type (PDF-417)
(4) Text:
TEXT, RTXT etc.
(5) Others:
Macro, JOBx, Device setting etc.
d) Connectivity
plug & play, Windows 95/98/ME/NT4.0/2000/XP
SNMP (KM-NET viewer)
Smoothing
(Available only in 600 dpi mode or fast 1200 mode; On at the factory default setting)
Toner saving
Resolution
600 dpi mode: 600 600 dpi
300 dpi mode: 300 300 dpi
(Fast 1200 mode at the factory default setting)
Gray scale
600 dpi mode: 203 levels
Dimensions
Weight
FS-6020
Power source
220-240 V AC, 50/60 Hz (European countries)
Power consumption
Normal operating: 382 W
Ready: 21 W
EcoPower: 8 W
Current
7.2 A: 21 W (European countries)
Ready: 31 dB(A)
Options
13, memory card (CompactFlash), hard disk unit (Microdrive), network interface card
IB-20 (10 BASE-T/100BASE-TX/10BASE-2), network interface card IB-21E (10
BASE-T/100BASE-TX), wireless network interface card IB-22 (compatible to IEEE
802.11b), serial interface board IB-11, paper feeder PF-400 (250 sheets [60 to 105 g/
m2] 1 cassette, A3, A4, A4R, A5, B4, B5, folio, ledger, legal, let5ter, and letter-R),
duplexer DU-400
FS-6020
1-1-2 Parts names
(1) Printer
Figure 1-1-1
1 Operation panel
2 Front cover
3 Top cover
4 Face-down tray
5 MP tray
6 Paper cassette
7 Optional interface slot cover
8 Power switch
9 AC inlet
0 Rear cover
! Optional interface slot
@ Memory card slot
# Parallel interface
$ USB interface
% Caution label
PARTS LIST
Ecosys Printer
FS-6020
Published in July 1,2003
2BZ70770-02
842BZ120-02
Contents
Enclosure (01-) 3
Upper Frame Unit 1 (02-) 5
Upper Frame Unit 2 (03-) 8
Feed assembly (04-) 10
Drive unit (05-) 12
MPF (06-) 14
Scanner (07-) 16
Fuser unit (08-) 18
PU 1 (10-) 21
PU 2 (10-) 23
Paper cassette (11-) 25
Packing Assemblies (P-) 27
Notes on Ordering
? Parts with + are component parts or sub-assemblies of the assembly appearing above them.
? Parts with ++ are component parts of the assembly marked with + immediately above them.
? SP means service parts that are available for ordering.
1. Enclosure (01-)


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.