Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Kyocera-mita
  • Models included:
    • Kyocera-Mita FS-9100DN
    • Kyocera-Mita FS-9500DN

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English
  • Number of pages:   251
  • File size:  ∼ 10.74  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMKT-1014

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

SERVICE
MANUAL
Published in Sep. ’01
842BL110
2BL70760
Revision 2.1
CONTENTS
1-1 Specifications
1-1-1 Specifications
1-1-2 Parts names
(1) Printer
(2) Operator panel
1-1-3 Machine cross section
1-1-4 Drive system
(1) Drive system 1 (drive motor and eject motor drive trains)
(2) Drive system 2 (paper feed motor drive train)
CONTENTS
1-2 Handling precautions
1-2-1 Drum
1-2-2 T oner
1-2-3 Installation environment
CONTENTS
1-3 Installation
1-3-1 Unpacking and installation
(1) Installation procedure
1-3-2 Installing the cassette heater (option)
1-3-3 Installing DIMMs (option)
1-3-4 Installing the network interface card (option)
1-3-5 Installing the hard disk (option)
1-3-6 Installing the memory card (option)
CONTENTS
1-4 Service and maintenance mode
1-4-1 Service mode
(1) Executing service mode
1-4-2 Maintenance mode
(1) Maintenance mode
(2) Executing a maintenance item
(3) Contents of maintenance mode items
1-4-3 Maintenance
(1) Replacing the toner container
CONTENTS
1-5 Troubleshooting
1-5-1 Paper misfeed detection
(1) Paper misfeed indication
(2) Paper misfeed detection conditions
(3) Paper misfeeds
1-5-2 Self-diagnosis
(1) Self-diagnostic function
(2) Self diagnostic codes
1-5-3 Image formation problems
(1) No image appears (entirely white).
(2) No image appears (entirely black).
(3) Image is too light.
(4) Background is visible.
(5) A white line appears longitudinally.
(6) A black line appears longitudinally.
(7) A black line appears laterally.
(8) One side of the copy image is darker than the other.
(9) Black dots appear on the image.
(10) Image is blurred.
(11) The leading edge of the image is misaligned with the original image.
(12) Paper creases
(13) Offset occurs
(14) Image is partly missing.
(16) Image is out of focus
(15) Fusing is poor.
(17) Image is not square.
1-5-4 Electrical problems
(1) The machine does not operate when the power switch is turned on.
(2) The drive motor does not operate (C2000).
(3) The paper feed motor does not operate (C2500).
(4) The eject motor does not operate.
(5) The upper lift motor does not operate (C1010).
(6) The lower lift motor does not operate (C1020).
(7) Cooling fan motor 1 does not operate.
(8) Cooling fan motor 2 does not operate.
(9) Cooling fan motor 3 does not operate.
(10) Cooling fan motor 4 does not operate.
(11) Cooling fan motor 5 does not operate
(12) Cooling fan motor 6 does not operate.
(13) Cooling fan motor 7 does not operate.
(14) Cooling fan motor 8 does not operate.
(15) The upper paper feed clutch does not operate.
(16) The lower paper feed clutch does not operate.
(17) Feed clutch 1 does not operate.
(18) Feed clutch 2 does not operate.
(19) Feed clutch 3 does not operate.
(20) The MP paper feed clutch does not operate.
(21) The MP feed clutch does not operate.
(22) The registration clutch does not operate.
(23) The feedshift solenoid does not operate
(24) The toner feed solenoid does not operate.
(25) The cleaning lamp does not turn on.
(26) The fuser heater does not turn on (C6000).
(27) The fuser heater does not turn off.
(28) Main charging is not performed.
(29) Transfer charging is not perfor med.
(30) No developing bias is output.
(31) The message requesting paper to be loaded is shown when paper is present in
the upper cassette
(32) The message requesting paper to be loaded is shown when paper is present in
the lower cassette.
(33) The message requesting paper to be loaded is shown when paper is present on the MP tray.
(34) The size of paper in the upper cassette is not displayed correctly.
(35) The size of paper in the lower cassette is not displayed correctly.
(36) The printing width of the paper on the MP tray is not detected correctly.
(37) A paper jam in the paper feed, paper conveying or fuser section is indicated
when the power switch is turned on.
(38) The message requesting covers to be closed is displayed when the front cover and
conveying cover are closed
(39) Others.
1-5-5 Mechanical problems
(1) No primary paper feed.
(2) No secondary paper feed
(3) Skewed paper feed.
(4) Multiple sheets of paper are fed at one time.
(5) Paper jams.
(6) Toner drops on the paper conveying path.
(7) Abnormal noise is heard.
1-5-6 Repetitive defects gauge
(1) Repetitive defects gauge.
FS-9100DN/9500DN
*Optional.
1. Paper feed section
No paper feed from the upper cassette (jam code 10)
Feed switch 1 (FSW1) does not turn on within 841 ms of the upper paper feed clutch (PFCL-U) turning on; the clutch is then
successively turned off for 1 s and turned back on, but the switch again fails to turn on within 841 ms.
PFCL-U OFF
841 ms 841 ms
Timing chart 1-5-1
N o paper feed from the lower cassette (jam code 11)
Feed switch 2 (FSW2) does not turn on within 882 ms of the lower paper feed clutch (PFCL-L) turning on; the clutch is then
successively turned off for 1 s and turned back on, but the switch again fails to turn on within 882 ms.
PFCL-L OFF
882 ms 882 ms
Timing chart 1-5-2
No paper feed from paper feeder PF-75* (jam code 12)
Feed switch 3 (FSW3) does not turn on within 650 ms of paper feed clutch 1 (PFCL1) turning on.
PFCL1 OFF
FSW3 650 ms
Timing chart 1-5-3
No paper feed from paper feeder PF-70* upper cassette (jam code 12)
Feed switch 3 (FSW3) does not turn on within 880 ms of the desk upper paper feed clutch (DPFCL-U) turning on; the clutch
is then successively held off for 1 s and turned back on, but the switch again fails to turn on within 880 ms.
DPFCL-U OFF
880 ms 880 ms
Timing chart 1-5-4
No paper feed from paper feeder PF-70* lower cassette (jam code 13)
Desk feed switch (DFSW) does not turn on within 880 ms of the desk lower paper feed clutch (DPFCL-L) turning on; the clutch
is then successively held off for 1 s and turned back on, but the switch again fails to turn on within 880 ms.
DPFCL-L OFF
880 ms 880 ms
Timing chart 1-5-5
PARTS LIST Ecosys Printers
FS-9100DN/FS-9500DN
2BL70770
8422BL120
Contents 1. Enclosure (01-) Page 3
2. Upper Frame Unit (02-) Page 6
3. Paper cassette (03-) Page 9
4. Paper feed unit, 1 (04-) Page 12
5. Paper feed unit, 2 (05-) Page 14
6. Paper feed unit, 3 (06-) Page 17
7. Paper conveyers (07-) Page 19
8. Paper exit (08-) Page 22
9. Bypass unit (09-) Page 25
10. Bypass feed unit (10-) Page 28
11. LSU (11-) Page 30
12. Developer unit (12-) Page 32
13. Fuser unit (13-) Page 35
14. Cleaning system (14-) Page 38
15. Drive unit, 1 (15-) Page 41
16. Drive unit, 2 (16-) Page 44
17. Electrical components (17-) Page 47
18. Parts Packages Page 51
Legend
+ These parts are component parts or sub-assemblies of the assembly appearing immediately above them.
++ These parts are component parts or sub-assembly marked with a + appearing immediately above them.
ISP Initial service parts which primarily appear on the ISP list supplied by the manufacturer.
GSP General service parts which appear on the GSP list supplied by the manufacturer.
1. Enclosure (01-)
HCLAPD


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

6.50USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.