Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Samsung
  • Models included:
    • Samsung Color Laser CLP-600
    • Samsung Color Laser CLP-600N
    • Samsung Color Laser CLP-650
    • Samsung Color Laser CLP-650N

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English
  • Number of pages:   205
  • File size:  ∼ 9.55  MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   BMSG-1006

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

Manual
SERVICE
Color Laser Printer
CLP-600 Series
CLP-600/XEV,CLP-600N/XEV
Basic Model : CLP-600
Samsung Color Laser Printer The keynote of Product
- Speed: A4, 20/20ppm(Color/Mono)
Up to 2400dpi x 600dpi
- Paper Path: FISO(Front-In Side-Out),
Single Pass(Tandem)
- Emulation: SPL-C(GDI)
- System Controller: V320
- Processor: PMC RM5231A 250MHz
- Memory: Standard SDRAM capacity is 32MB
- Cassette: 250Sheet(Settable Type/A4, Ltr)
- SCF: 500Sheet Second Cassette Feeder
(option)
- Toner Cartridge: 4K(Color/Mono),Starter 4K(Color/Mono)
- Fuser Type: 1 E-coil Roller(heat roller)
- I/O: USB 2.0
- Machine Life: Color,Mono(300, 000pages) CLP-600
Contents
1. Precautions
1.1 Safety Warning 1-1
1.2 Caution for safety 1-2
1.3 ESD Precautions 1-5
1.4 Super Capacitor or Lithium Battery Precautions 1-5
2. Product Specification
2.1 Product Overview 2-1
2.2 Specifications 2-2
2.3 Model Comparison Table 2-6
3. System Overview
3.1 System Structure 3-1
3.2 H/W Structure and Descriptions 3-13
3.3 Driver Board 3-15
3.4 Deve CRUM 3-17
3.5 Belt CRUM 3-18
3.6 Deve CRUM Interface board 3-19
3.7 Belt CRUM Interface board 3-20
3.8 Power Supply 3-21
3.9 HVPS 3-23
Continued
4. S/W Structure and Descriptions
4.1 Architecture 4-1
4.2 Language Monitor 4-1
4.3 Status Monitor 4-1
4.4 Network Interface 4-2
4.5 Printer Driver <-> Status Monitor 4-2
4.6 System F/W Flow 4-3
4.7 Alarm Shortage 4-4
4.8 Error status 4-4
4.9 CRUM Overview 4-5
4.10 FW Upgrade 4-5
5. Disassembly and Reassembly
5.1 Precautions When Replacing Parts 5-2
5.2 Parts for Maintenance and Repair 5-3
5.3 Information Related in Disassembly and Assembly 5-5
5.4 Disassembly Procedure 5-13
6. Alignment and Adjustments
6.1 Paper path and Paper jam 6-1
6.2 Jam Removal 6-4
6.3 Sample Pattern 6-14
6.4 Checking the Remaining Toner and Others 6-15
6.5 Understanding the Control Panel 6-16
6.6 Periodic Defective Image 6-20
6.7 How to use EDC (Engine Diagnostic Control) Mode 6-21
Samsung Electronics
Service Manual
Troubleshooting
7.1.1 Basic Check List
1. Check the Power.
• Does "Warming Up" appear on the display?
--> If not check power cable, switch or SMPS. (see section 7.1.2 below)
--> Does the wall socket work?
• Do the Motors or other components initialize (listen for main motor, fan and LSU sounds)?
--> If not or there are none of the normal startup sounds check cable, switch or SMPS.
--> Does the wall socket work?
2. Check the LCD Panel.
• Is there any display at all?
--> If not check power cable, switch or SMPS. (see section 7.1.2 below)
--> Does the wall socket work?
• Is the display a meaningful message (are there any broken or badly formed characters)?
--> Check the main PBA and cable harness.
• Is the message on the LCD Panel a standard error message?
--> Refer to section 7.5
3. Check the Paper Path
• Is there a Paper Jam?
--> Remove any paper fragments caught in the paper path.
--> Refer to section 7.3
• Paper Jam occurs repeatedly at a specific point in the Paper Path
--> Dismantle the machine and carefully inspect the region where the jam occurs.
(Especially, check if paper fragments are caught in the Fuser
4. Print the Information Page (Configuration).
• Is there a problem?
--> If there is an error see section 2) or 3) above.
• Try printing a test page from a computer.
--> If there is an error check cables and driver installation.
5. Check the Print Quality.
•Is there are a Print Quality Problem?
--> Refer to section 7.2
6. Check consumables (toner etc.).
•Using the keys print the Information Page.
--> Refer to 7.1.4 below for expected life of various consumable parts, compare this with the figures printed and
replace as required
Exploded Views & Parts List
8.1 Main
8.2 Front Cover
8.3 Top Cover
8.4 Right Cover
8.5 Base Frame
8.6 Main Frame
8.7 Fuser
8.8 Main Drive
8.9 MPF
8.10 Pick Up
8.11 Guide Paper
8.12 Cassette Unit
8. Exploded Views and Parts List (CLP-600N/XEV)
Contents


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.