Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Icom
  • Models included:
    • Icom IC-2200H

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   54
  • File size:  ∼ 4.90 MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   ROIC-0009

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

VHF TRANSCEIVER
i2200H
SERVICE
MODEL VERSION SYMBOL
INTRODUCTION
This service manual describes the latest service information
for the IC-2200HVHF TRANSCEIVER at the time of publica-
DANGER
NEVER connect the transceiver to an AC outlet or to a DC
power supply that uses more than 16 V. This will ruin the
transceiver.
DO NOT expose the transceiver to rain, snow or any liquids.
DO NOTreverse the polarities of the power supply when con-
necting the transceiver.
DO NOT apply an RF signal of more than 20 dBm (100 mW)
to the antenna connector. This could damage the transceiv-
er’s front end.
ORDERING PARTS
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit order numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required

1130008350 S.IC LV2105V IC-2200H MAIN UNIT 5 pieces
8810009610 Screw FH M2.6 ×6 ZK IC-2200H Cover 10 pieces
Addresses are provided on the inside back cover for your
convenience.
REPAIR NOTES
1. Make sure a problem is internal before disassembling the
transceiver.
2. DO NOT open the transceiver until the transceiver is
disconnected from its power source.
3. DO NOT force any of the variable components. Turn
them slowly and smoothly.
4. DO NOT short any circuits or electronic parts. An insu-
lated tuning tool MUST be used for all adjustments.
5. DO NOT keep power ON for a long time when the trans-
ceiver is defective.
6. DO NOT transmit power into a signal generator or a
sweep generator.
7. ALWAYS connect a 40 dB to 50 dB attenuator between
the transceiver and a deviation meter or spectrum ana-
lyzer when using such test equipment.
8. READ the instructions of test equipment thoroughly
before connecting equipment to the transceiver.
To upgrade quality, any electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation.
Europe
Taiwan
U.S.A.
Export
Europe-1
Export-1
IC-2200H
Icom, Icom Inc. and are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.
TABLE OF CONTENTS
SECTION 1 SPECIFICATIONS
SECTION 2 INSIDE VIEWS
2 - 1 IC-2200H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
2 - 2 HM-133V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 2
SECTION 3 OPTIONAL UNIT INSTALLATION
SECTION 4 CIRCUIT DESCRIPTION
SECTION 5 ADJUSTMENT PROCEDURES
SECTION 6 PARTS LIST
SECTION 7 MECHANICAL PARTS AND DISSASEMBLY
7 - 1 IC-2200H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 1
7 - 2 HM-133V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 1
SECTION 8 SEMI-CONDUCTOR INFORMATION
SECTION 9 BOARD LAYOUTS
9 - 1 LOGIC UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 1
9 - 2 MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 3
9 - 3 HM-133V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 5
9 - 4 HM-118TN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 7
SECTION 10 BLOCK DIAGRAMS
10 - 1 IC-2200H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 1
10 - 2 HM-133V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 2
SECTION 11 VOLTAGE DIAGRAMS
11 - 1 LOGIC UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 1
11 - 2 MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 2
11 - 3 HM-133V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 3
SECTION 12 HM-118/N (OPTIONAL UNIT)
12 - 1 INSIDE VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 1
12 - 2 BOARD LAYOUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 1
12 - 3 MECHANICAL PARTS LIST AND DISSASEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 2
SECTION 13 UT-108 (OPTIONAL UNIT)
13 - 1 BOARD LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 - 1
SECTION 14 UT-115 (OPTIONAL UNIT)
14 - 1 BOARD LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 1
14 - 2 SEMI-CONDUCTOR INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 2
14 - 3 BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 2
14 - 4 VOLTAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 3
SECTION 1 SPECIFICATIONS
M GENERAL
• Frequency range :
1Specifications guaranteed 144.000 – 146.000 MHz only
2Specifications guaranteed 144.000 – 148.000 MHz only
• Mode : FM, AM (Receive only)
• Number of memory channel : 206 (include in 6 band edges memory and 1 call channel)
• Usable temperature range : –10°C to +60°C; +14°F to +140°F
• Scan type : Full, Program, Priority, Memory channel, Bank, Skip and Tone scans
• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
• Frequency stability : ±10 ppm (–10°C to +60°C; +14°F to +140°F)
• Power supply requirement : 13.8 V DC ±15 % (negative ground)
• Current drain (at 13.8 V DC) : Receive Standby (squelched) 0.8 A
Max. audio 1.0 A
Transmit at 65 W or 50 W 15.0 A (except [TPE])
at 25 W 9.0 A
at 24 W 10.0 A ([TPE] only)
at 10 W 6 A (except [TPE])
at 5 W 5 A
• Antenna connector : SO-239 (50 ?)
• Dimensions : 140(W)×40(H)×146(D) mm;
(projections not included) 51/2(W)×19/16(H)×53/4(D) inch
• Weight : Approx. 1.25 kg; 2 lb 12 oz
M TRANSMITTER
• Output power :
• Modulation system : Variable reactance frequency
• Maximum frequency deviation : ±5.0/±2.5* kHz *except [EXP-1]
• Spurious emissions : Less than –60 dBc
• Microphone connector : 8-pin modular (600 ?)
M RECEIVER
• Receive system : Double-conversion superheterodyne
• Intermediate frequency : 1st 21.7 MHz
2nd 450 kHz
• Sensitivity (at 12 dB SINAD) : Less than 0.18 µV
• Squelch sensitivity (threshold) : Less than 0.13 µV
• Selectivity : (Wide) More than ±6 kHz at 6 dB, More than ±14 kHz at 60 dB
(Narrow)* More than ±3 kHz at 6 dB, More than ±9 kHz at 55 dB
*except [EXP-1]
• Spurious and image rejection : More than 60 dB
• Audio output power (at 13.8 V) : More than 2.4 W at 10% distortion with an 8? load
• External speaker connector : 2-conductor 3.5(d) mm ( 1/8")/8?
All stated specifications are subject to change without notice or obligation.
High Middle-high Middle-low Low
65 W 25 W 10 W 5 W
50 W 25 W 10 W 5 W
24 W 10 W – 5 W
Version
[TPE], [KOR]
Receive (MHz) Transmit (MHz)
118.000 – 174.000*
1 144.000 – 146.000
118.000 – 174.000*
2 144.000 – 148.000
118.000 – 174.000*
2 136.000 – 174.000*
144.000 – 146.000 144.000 – 146.000
Version
[EXP], [EXP-1]
[EUR-1], [TPE],
• UT-115 SPECIFICATIONS
M GENERAL
• Usable temperature range : –10°C to +60°C; +14°F to +140°F
• Power supply requirement : 5.0 V DC
(4.5 V–8.5 V for AMBE IC VCC line)
• AF input level : 1 V p-p typical
• Modulation output level : 350 mV p-p typical
• Demodulation input level : 500 mV p-p typical
• AF output level : 750 mV p-p typical
• CODEC type : AMBE
• Transfer speed : 4.8 kbps
• Control signal input voltage : 3.0 V–5.0 V for High
0 V for Low
• Control signal output voltage : Open collector for High
0 V for Low
• Current drain (at 5.0 V DC) : 55 mA typical
• Dimentions : 30(W)×38(D) mm;
(projections not included) 13/16(W)×11/2(D) inch
• Weight : Approx. 6 g; 7/32 oz
(accessoreis not included)
• Connector : AXN430C330
All stated specifications are subject to change without notice or obligation.
2-2 HM-133V
(IC1: µPD789071)
Reset IC
(IC3: BD5245G)
EE-PROM
(IC6: BR24L02FV)
5V regulator
Q1: 2SC2712
D1: MA8056
LED driver
Q6, Q7: 2SA1586
DS10*: LT1EP53A
Regulator switch
Q8: 2SC2712
Q9: DTB113ZK
LED driver
Q4, Q5: 2SA1586
DS11*: LT1EP53A
Data buffer circuit
Q2: DTC114EU
Q3: DTA114EU
(IC1: µPD789071)
Reset IC
(IC3: BD5245G)
EE-PROM
IC6: BR24L02FV
[MAIN-A] unit only5V regulator
Q1: 2SC2712
D1: MA8056
LED driver
Q6, Q7: 2SA1586
DS10*: LT1EP53A
Regulator switch
Q8: 2SC2712
Q9: DTB113ZK
LED driver
Q4, Q5: 2SA1586
DS11*: LT1EP53A
Data buffer circuit
Q2: DTC114EU
Q3: DTA114EU
*Located under side of the point
SECTION 9 BOARD LAYOUTS
9-1 LOGIC UNIT • TOP VIEW
S.MW/MW
MICROPHONE
SET/LOCK
MONI/ANM
LOW/DUP
TONE/T-SCAN
M/CALL/PRIO
V/MHz/SCAN
BANK/OPT
8 14 14 8
to the microphone
1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan S-14017HZ-C1
C 2004 Icom Inc.


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.