Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Icom
  • Models included:
    • Icom IC-F6061
    • Icom IC-F6061D
    • Icom IC-F6062
    • Icom IC-F6063

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   204
  • File size:  ∼ 18.70 MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   ROIC-0091

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

SERVICE MANUAL
ADDENDUM
CONTENTS
REPLACEMENT PAGES . . . . . . . . . . . . . .1-1,6-1,6-2 and 6-4 to 6-6
PARTS LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
BOARD LAYOUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
VOLTAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 27
Sep. 2009
MODEL VERSION FREQUENCY
RANGE DESCRIPTION TX
IC-F6061
USA-01 400-470 MHz
(Low band) –
USA-02 450-512 MHz
(High band)
USA-03 400-470 MHz
(Low band)
MDC compatible USA-04 450-512 MHz
(High band)
USA-55 400-470 MHz
(Low band) USA-56
IC-F6061D
USA-01 400-470 MHz
(Low band) MDC compatible
UT-126H installed
USA-02 450-512 MHz
(High band)
CHN-01 400-470 MHz
(Low band)
IC-F6062
EUR-01 400-470 MHz
(Low band) –
EUR-03 400-470 MHz
(Low band) MDC compatible
IC-F6062D EUR-03 400-470 MHz
(Low band) UT-126H installed
IC-F6063
EXP-01 400-470 MHz
(Low band) –
EXP-02 450-520 MHz
(High band)
EXP-03 400-470 MHz
(Low band)
MDC compatible EXP-04 450-520 MHz
(High band)
IC-F6061-L CHN-01 350–400 MHz
(350 MHz band) 45W
IC-F6061D-L EXP-05 350–400 MHz
(350 MHz band) UT-126H installed
SERVICE MANUAL
ADDENDUM
CONTENTS
PARTS LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
BOARD LAYOUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VOLTAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 24
Jun. 2009
SERVICE MANUAL
ADDENDUM
CONTENTS
REPLACEMENT PAGES . . . . . . . . . . . . . . . . . . . . . . 4-1, 4-2
PARTS LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
BOARD LAYOUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VOLTAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 24
May. 2009
MODEL VERSION FREQUENCY
RANGE DESCRIPTION TX
IC-F6061
USA-01 400-470 MHz
(Low band) –
USA-02 450-512 MHz
(High band)
USA-03 400-470 MHz
(Low band)
MDC compatible USA-04 450-512 MHz
(High band)
USA-55 400-470 MHz
(Low band) USA-56
IC-F6061D
USA-01 400-470 MHz
(Low band) MDC compatible
UT-126H installed
USA-02 450-512 MHz
(High band)
CHN-01 400-470 MHz
(Low band)
IC-F6062
EUR-01 400-470 MHz
(Low band) –
EUR-03 400-470 MHz
(Low band) MDC compatible
IC-F6062D EUR-03 400-470 MHz
(Low band) UT-126H installed
IC-F6063
EXP-01 400-470 MHz
(Low band) –
EXP-02 450-520 MHz
(High band)
EXP-03 400-470 MHz
(Low band) MDC compatible
EXP-04 450-520 MHz
(High band)
SERVICE MANUAL
ADDENDUM
CONTENTS
REPLACEMENT PAGES . . . . . . . . . . . . . . . . . . . . . . 6-1 to 6-6
PARTS LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
VOLTAGE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 20
Jan. 2009
MODEL VERSION FREQUENCY
RANGE DESCRIPTION TX
IC-F6061
USA-01 400-470 MHz
(Low band) –
USA-02 450-512 MHz
(High band)
USA-03 400-470 MHz
(Low band)
MDC compatible USA-04 450-512 MHz
(High band)
USA-55 400-470 MHz
(Low band) USA-56
IC-F6061D
USA-01 400-470 MHz
(Low band) MDC compatible
UT-126H installed
USA-02 450-512 MHz
(High band)
CHN-01 400-470 MHz
(Low band)
IC-F6062
EUR-01 400-470 MHz
(Low band) –
EUR-03 400-470 MHz
(Low band) MDC compatible
IC-F6063
EXP-01 400-470 MHz
(Low band) –
EXP-02 450-520 MHz
(High band)
EXP-03 400-470 MHz
(Low band) MDC compatible
EXP-04 450-520 MHz
(High band)
S-14324XZ-C1-w
Jan. 2008
UHF TRANSCEVER
iC-f6061
iC-f6061d
iC-f6062
iC-f6063
This service manual describes the latest service information
for the IC-F6061/F6061D/F6062/F6063 UHF TRANSCEIVER
at the time of publication. NEVER connect the transceiver to an AC outlet or to a DC
power supply that uses more than 15 V. This will ruin the
transceiver.
DO NOT expose the transceiver to rain, snow or any liquids.
DO NOT reverse the polarities of the power supply when
connecting the transceiver.
DO NOT apply an RF signal of more than 20 dBm (100 mW) to
the antenna connector. This could damage the transceiver’s
front end.
To upgrade quality, any electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation.
MODEL VERSION FREQUENCY
RANGE DESCRIPTION TX
IC-F6061
USA-01 400-470 MHz
(Low band) –
USA-02 450-512 MHz
(High band)
USA-03 400-470 MHz
(Low band) MDC compatible
USA-04 450-512 MHz
(High band)
IC-F6061D
USA-01 400-470 MHz
(Low band) MDC compatible
UT-126H installed USA-02 450-512 MHz
(High band)
IC-F6062
EUR-01 400-470 MHz
(Low band) –
EUR-03 400-470 MHz
(Low band) MDC compatible
IC-F6063
EXP-01 400-470 MHz
(Low band) –
EXP-02 450-520 MHz
(High band)
EXP-03 400-470 MHz
(Low band) MDC compatible
EXP-04 450-520 MHz
(High band)
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit Icom parts numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required

1110003491 S.IC TA31136FNG IC-F6061 MAIN UNIT 5 pieces
8820001210 Screw 2438 screw IC-F6062 Top cover 10 pieces
Addresses are provided on the inside back cover for your
convenience.
Icom, Icom Inc. and logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
ORDERING PARTS
1. Make sure the problem is internal before disassembling
the transceiver.
2. DO NOT open the transceiver until the transceiver is
disconnected from its power source.
3. DO NOT force any of the variable components. Turn
them slowly and smoothly.
4. DO NOT short any circuits or electronic parts. An
insulated tuning tool MUST be used for all adjustments.
5. DO NOT keep power ON for a long time when the
transceiver is defective.
6. DO NOT transmit power into a signal generator or a
sweep generator.
7. ALWAYS connect a 50 dB to 60 dB attenuator between
the transceiver and a deviation meter or spectrum
analyzer when using such test equipment.
8. READ the instructions of test equipment thoroughly
before connecting equipment to the transceiver.
REPAIR NOTES
INTRODUCTION CAUTION
CONTENTS
SECTION 1 SPECIFICATIONS
SECTION 2 INSIDE VIEWS
SECTION 3 DISASSEMBLY INSTRUCTIONS
SECTION 4 OPTIONAL UNITS INSTALLATION
SECTION 5 CIRCUIT DESCRIPITON
5-1 RECEIVER CIRCUITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5-2 TRANSMITTER CIRCUITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5-3 FREQUENCY SYNTHESIZER CIRCUITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
5-4 POWER SUPPLY CIRCUITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
5-5 PORT ALLOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
SECTION 6 ADJUSTMENT PROCEDURES
6-1 PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
6-2 FREQUENCY ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
6-3 TRANSMIT ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
6-4 RECEIVE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
SECTION 7 PARTS LIST
SECTION 8 MECHANICAL PARTS
SECTION 9 BOARD LAYOUTS
SECTION 10 BLOCK DIAGRAM
SECTION 11 VOLTAGE DIAGRAM
SECTION 12 HM-152
SECTION 1 SPECIFICATIONS
[USA] [EXP] [EUR]
GENERAL
• Frequency coverage 400–470 MHz [USA-01]
450–512 MHz [USA-02]
400–470 MHz [EXP-01]
450–520 MHz EXP-02] 400–470 MHz
• Type of emission Wide 16K0F3E (25.0 kHz)
Middle – 14K0F3E (20.0 kHz)
Narrow
11K0F3E (12.5 kHz)
11K0F7E/D (12.5 kHz)*
8K10F1E/D (12.5 kHz)*
4K00F1E/D (6.25 kHz)*
8K50F3E (12.5 kHz)
4K00F1E/D (6.25 kHz)*
• Number of programable channels max. 512 channels (128 zones)
• Antenna impedance 50 O (nominal)
• Operating temperature range -30° to +60°; -22°F to +140°F; -22°F to +140°F –25°C to +55°C
• Power supply requirement
(negative ground) 13.6 V DC (nominal) 13.2 V DC (nominal)
• Current drain
(approx.) RX Stand-by 300 mA
Max.audio 1200 mA
TX at 25 W 7 A
at 45 W 14 A
• Dimensions (projections not included) 160 (W) × 45 (H) × 150 (D) mm ; 2 3/32 (W) × 4 23/32 (H) × 1 9/32 (D) in
• Weight 1310 g; 2 Ib 14 oz
TRANSMITTER
• Transmit output power 45 W 25 W
• Modulation Variable reactance frequency modulation
• Max. permissible deviation Wide ±5.0 kHz
Middle – ±4.0 kHz
Narrow ±2.5 kHz
• Frequency error ±1.0 ppm ±1.5 kHz
• Spurious emission
75 dB typ.
0.25 µ W (= 1 GHz),
1.0 µ W (>1 GHz)
• Adjacent channel power Wide More than 70 dB
Middle – More than 70 dB
Narrow More than 60 dB
• Audio harmonic distortion 3% typ. (with 1 kHz AF 40% deviation)
• FM hum and noise
(without CCITT filter)
Wide More than 40 dB (45 dB typ.) –
Narrow More than 34 dB (40 dB typ.) –
• Limiting charact of modulation 70–100% of max. deviation
• Microphone impedance 600 O
RECEIVER
• Receive system Double-conversion superheterodyne
• Intermediate frequencies 1st IF; 46.35 MHz, 2nd IF; 450 kHz
• Sensitivity 0.25 µV typ. at 12 dB SINAD -4 dBµV (EMF) typ.
at 20 dB SINAD
• Squelch sensitivity (at threshold) 0.25 µV typ.
• Adjacent channel
selectivity
Wide More than 80 dB (85 dB typ.)
Middle - More than 78 dB (83 dB typ.)
Narrow More than 70 dB (75 dB typ.)
• Spurious response More than 85 dB (90 dB typ.)
• Intermodulation More than 75 dB (77 dB typ.) More than 65 dB (70 dB typ.)
• Hum and noise
(without CCITT filter)
Wide More than 45 dB (50 dB typ.) –
Narrow More than 40 dB (45 dB typ.) –
• Audio output power 4 W typ. at 10% distortion with a 4 O load
• Audio output impedance 4 O
All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with EIA-152-C/204D, TIA-603 ([USA], [EXP]) or EN 300 086 ([EUR]).
*; Available when an optional digital unit (UT-119H/UT-126H) is installed.
1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan S-14324XZ-C1-w
© 2007–2008 Icom Inc.


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.