Click 'Download sample' for the free sample file:

 Download sample

Make/Model Information:

  • Brand:   Yaesu
  • Models included:
    • Yaesu VX-6000V

File Information:

  • Type:   Factory Service Manual (FSM)
  • Language:   English (EN)
  • Number of pages:   81
  • File size:  ∼ 6.10 MB
  • File Format:   PDF only
  • SME Watermarks:   None
  • Password lock:   No
  • Edit/copy/modify:   Yes
  • SKU:   ROYA-0025

NOTE:  This list was created by program script and may not accurately represent the text from the source pages.   For full preview please click on 'Download sample':

 Download sample

Introduction
This manual provides technical information necessary for servicing the VX-6000V VHF FM Transceiver.
Servicing this equipment requires expertise in handling surface-mount chip components. Attempts by non-qualified
persons to service this equipment may result in permanent damage not covered by the warranty, and may be illegal in
some countries.
Two PCB layout diagrams are provided for each double-sided circuit board in the Transceiver. Each side of is referred
to by the type of the majority of components installed on that side (“leaded” or “chip-only”). In most cases one side has
only chip components, and the other has either a mixture of both chip and leaded components (trimmers, coils, electrolyt-
ic capacitors, ICs, etc.), or leaded components only.
While we believe the technical information in this manual to be correct, VERTEX STANDARD assumes no liability
for damage that may occur as a result of typographical or other errors that may be present. Your cooperation in pointing
out any inconsistencies in the technical information would be appreciated.
ę2003 VERTEX STANDARD CO., LTD. EH024N90A
Service Manual
VX-6000V
VHF FM Transceiver
Operating Manual Reprint
Cloning
Specifications
Exploded View & Miscellaneous Parts
Block Diagram
Interconnection Diagram
Circuit Description
Alignment
Contents
Board Unit (Schematics, Layouts & Parts
MAIN Unit
DISPLAY Unit
KEY Unit
VR Unit
MIC CONN Unit
PA Unit
Optional Board Unit (Schematics, Layouts & Parts
F2D-8 2-Tone Decode Unit
VTP-50 VX-Trunk Unit
FVP-25 Encryption / DTMF Pager Unit
F5D-14 5-Tone Unit
FIF-7 Connection Unit
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
International Division
8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
Operating Manual Reprint
CONTROLS & CONNECTORS
Front Panel
└POWER Button
Press the button to turn the transceiver ON and
┴TX Indicator
This lamp glows red when the radio is transmit-
┬BUSY Indicator
This lamp glows green when the channel is busy.
├Liquid Crystal Display
The display include an 8-character alpha-numeric
section showing channel and group names, sta-
tus and identity information, and error messages.
Additional indicators on the display show prior-
ity channel assignments and scan include / ex-
clude selection.
─p/q Button
Pressing these buttons changes the current group
(and displayed group number or name). Hold-
ing this button for more than 1/2 second causes
the function to repeat.
┼SQC Indicator
This lamp glows orange when incorrect position
at the setting of CE49.
ĂProgrammable Function Button (PF button)
This button can be set up for special applications,
such as high/low power selection, monitor, dim-
mer, talk-around, and call alert function, as de-
termined by your network requirements and pro-
grammed by your VERTEX STANDARD dealer.
ăVOLUME Knob
This knob sets the volume of the receiver.
╚EMERGENCY Microphone
The emergency microphone is located behind this
small slit. When the emergency feature is acti-
vated, this Microphone is enabled.
╔CHANNEL Selector Knob
This knob select the operating channel.
Programmable Function Button (PF button)
This button can be set up for special applications,
such as high/low power selection, monitor, dim-
mer, talk-around, and call alert function, as de-
termined by your network requirements and pro-
grammed by your VERTEX STANDARD dealer.
? ? ? ?
? ? ? ?
8 Character Alpha-numeric Display
Channel Group
This channel on “INTERCOM” List
This channel on
“SELECTABLE TONE” List
This channel on
“SCAN” List
Receiver Monitor
This channel on “PUBLIC
ADDRESS ” or “SPEAKER ”
This channel on
“HORN ALERT” List
This channel
on “OPTION”
This channel on “AUX A/B/C” List
Operating Manual Reprint
Side Panel
Microphone Jack (It is on both sides.)
Connect the microphone plug to this jack.
CONTROLS & CONNECTORS
REAR (Heatsink)
└Antenna Socket
The 50-ohm coaxial feedline to the antenna must
be connected here, using a type-M (PL-259) plug.
┴External Speaker Jack
An external loudspeaker may be connected to this
2-contact, 3.5-mm mini-phone jack.
Caution: Do not connect this line to ground, and be
certain that the speaker has adequate capa-
bility to handle the audio output from the
VX-6000.
┬13.4-V DC Power Connector
The supplied DC power cable must be connected
to this 4-pin connector. Use only the supplied
fused cable, extended if necessary, for power con-
nection.
├DSUB 25-Pin Accessory Connector
External TX audio line input, PTT (Push To Talk),
Squelch, and external RX audio line output sig-
nal may be obtained from this connector for use
with accessories such as data transmission/recep-
tion modems, ets.
Microphone Jack


Payment

Before sending payment please download the sample file to verify the following:

  •   Check the Brand, Model and Year.
  •   Review the Table of Contents (TOC).
  •   Review the Bookmarks.
  •   Inspect the quality of images.

7.00USD

Paypal
Credit card*
Debit card**

*Credit card or Debit card processing at Paypal portal.
**Debit card: available only from selected countries/territories.